Sound |
|
|
| Page |
No sound. | ≥Check the connections and settings. Check the input mode on the amplifier if you have | |||
Low volume. |
| connected one. |
| |
Distorted sound. | ≥Press [AUDIO] to select the audio. | 24 | ||
Cannot hear the desired audio | ≥Turn off V.S.S. in the following cases. | 27 | ||
type. |
|
| ||
|
|
| ||
| ≥The disc may have a restriction on the method of audio output. If “D.MIX” does not appear in | — | ||
|
| the display when playing |
| |
|
| be output. Refer to the disc’s jacket. |
| |
|
|
|
|
|
Cannot switch audio. | ≥You cannot switch the audio in the following cases. |
| ||
|
| — | ||
|
| 40 | ||
|
| 39 | ||
| ≥You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio | 40, 9 | ||
|
| cables (analog connection). |
| |
| ≥There are discs which audio cannot be changed because of how the disc was created. | — | ||
|
|
|
|
|
Operation |
|
|
|
|
|
|
|
|
|
Cannot operate the television. | ≥Change manufacturer code. Some televisions cannot be operated even if you change the | 13 | ||
The remote control doesn’t |
| code. |
| |
work. | ≥The remote control and main unit are using different codes. Change the code on the remote | 13 | ||
|
| control. |
| |
|
|
| Press and hold [ENTER] and the indicated number |
|
|
|
|
| |
|
|
| button at the same time for more than 2 seconds. |
|
|
|
|
| 4 |
| ≥The batteries are depleted. Replace them with new ones. | |||
| ≥Coloured glass may obstruct the signal reception/transmission. | — | ||
| ≥Don’t place the signal sensor in direct sunlight or in areas that may be subject to sunlight | — | ||
|
| exposure. |
| |
| ≥The child lock function is activated. | 44 | ||
|
|
|
|
|
The unit is on but cannot be | ≥Recording drive or playback drive have not been selected properly. | 16, 22 | ||
operated. | ≥Some operations may be prohibited by the disc. | — | ||
| ≥The unit is hot (“U14” appears on the display). Wait for “U14” to disappear. | — | ||
| ≥One of the unit’s safety devices may have been activated. | — | ||
|
| Reset the unit as follows: |
| |
|
| Press [Í/I] on the main unit to switch the unit to standby. |
| |
|
| If the unit doesn’t switch to standby, press and hold [Í/I] on the main unit for about 10 |
| |
|
| seconds. The unit is forcibly switched to standby. |
| |
|
| Alternatively, disconnect the AC mains lead, wait one minute, then reconnect it. |
| |
|
|
|
|
|
HDD activation is slow. | ≥The HDD is in SLEEP mode. (“HDD SLP” appears in the unit’s display.) | 15 | ||
|
|
|
|
|
Cannot eject disc. | ≥The unit may have a problem. While the unit is off, press and hold [∫] and [CH W] on the | 44 | ||
|
| main unit at the same time for about 5 seconds. Remove the disc and consult the dealer. |
| |
|
| If the Child Lock function is activated, above operation does not work. Cancel the Child Lock |
| |
|
| function. |
| |
|
|
|
|
|
Cannot tune channels. | ≥Check the connections. | 7, 8 | ||
Cannot download channel | ≥You must connect to a television equipped with the Q Link function with a fully wired | — | ||
| Scart cable to download channel presets. |
| ||
presets. |
|
| ||
|
|
|
| |
|
|
|
|
|
Recording, timer recording and transferring (dubbing) |
| |||
|
|
|
|
|
Cannot record. | ≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the | 14 | ||
|
| unit can record onto. |
| |
| ≥The disc is | 37 | ||
| ≥The | 14, 37 | ||
|
| MANAGEMENT. |
| |
| ≥Some programmes have limitations on the number of times they can be recorded (CPRM). | 46 | ||
| ≥You cannot record when there is not enough space or when the number of titles has | 24, 29, | ||
|
| reached its limit. Erase unwanted titles. | 37 | |
| ≥You cannot record on finalized | — | ||
| ≥Due to peculiarities of | — | ||
|
| and remove the disc or switch the unit on and off while a disc is loaded, a total of fifty times. |
| |
| ≥A | — | ||
|
|
|
|
|
Continued on next page
Reference
RQT7664
51
51