Panasonic DMR-E85H operating instructions Accessories, Remote control, Batteries, Use

Page 4

Accessories

Please check and identify the supplied accessories.

1 Remote control

1 AC mains lead

1 RF coaxial cable

2 Batteries

1 Audio/video cable

(EUR7721KH0)

For use with this unit only. Do not

 

for remote control

 

 

use it with other equipment.

 

 

 

started

The remote control

Getting

Batteries

 

 

R6/LR6, AA, UM-3

Insert so the poles (i and j) match those in the remote control. Do not use rechargeable type batteries.

Do not mix old and new batteries.

Do not use different types at the same time. Do not heat or expose to flame.

Do not take apart or short circuit.

Do not attempt to recharge alkaline or manganese batteries. Do not use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

[Note]

If you cannot operate the unit or television using the remote control after changing the batteries, please re-enter the codes (page 13).

Use

Remote control signal sensor

20˚

30˚ 20˚

30˚

7 m directly in front of the unit

RQT7664

4

The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by such loss.

Examples of causes of such losses are

A disc recorded and edited with this unit is played in a DVD recorder or computer disc drive manufactured by another company. A disc used as described above and then played again in this unit.

A disc recorded and edited with a DVD recorder or computer disc drive manufactured by another company is played in this unit.

4

Image 4
Contents Operating Instructions Instrucciones de funcionamiento Example EjemploStarted Table of contents Useful featuresAccessories Remote controlPlease check and identify the supplied accessories BatteriesRemote control Control reference guideMain unit Unit’s displayRecommended connection for your television When the unit is not to be used for a long timeDo not connect the unit through a video cassette recorder Connecting a television with 21-pin Scart terminal and VCR AV1 terminalConnection Component video outputVideo OUT terminal Component Video OUT terminalTo enjoy multi-channel surround sound on DVD-Video Connecting an amplifier or system componentConnection to a stereo amplifier Preset Download Setup with Q Link functions If the clock setting menu appearsEnter ReturnAuto-Setup Setup without Q Link functions Country setting menu appearsAuto-Setup starts. This takes about 8 minutes Auto-Setup is complete when you see the television picturePress 3, 4, 2, 1 to select Setup and press Enter Selecting television type and aspectPress Functions To enjoy progressive videoWhen the following indicator appears on the unit’s display Point the remote control at the televisionTo change the code on the remote control Television operationHDD and Disc information HDD and discs you can use for recording and playPlay-only discs 12 cm/8 cm Discs that cannot be playedHDD Hard disk drive handling care GettingPress W X CH to select the channel Recording television programmesPress ¥ REC to start recording Playing while you are recording Recording modes and approximate recording timesDirect TV Recording Flexible Recording Recording from an external equipmentTimer recording Using Showview number to make timer recordingsPress F Timer Press ShowViewManually programming timer recordings Press 3, 4 to select New TimerPress PROG/CHECK Press 1 to move through the itemsCheck, change or delete a programme Linked timer recordings with external equipment EXT LinkPress EXT Link Back Playing discsPlaying Operations during play Skipping the specifiedTime Time Slip Manual SkipEditing operations during play Changing audioPress Audio Press Erase Press 2, 1 to select Erase and press EnterUsing menus to play MP3 Using the tree screen to find a groupPress 3, 4, 2, 1 to select a group Press TOP MenuUsing on-screen menus and Status messages Disc menu-Setting the disc contentOn-screen menus Press DisplayStatus messages Press StatusPlay menu-Change the play sequence Picture menu-Change the picture qualityEditing titles/chapters Editing titles/chapters and playing chaptersPress Direct Navigator Press 3, 4, 2, 1 to select the title Press 3, 4, 2, 1 to select the chapterSet up Protection § Title operationsPress 2, 1 to select Yes and press Enter Press Enter at the start point and endPress 3 to cancel Creating, editing and playing play listsPress 3, 4, 2, 1 to select Play List and press Enter Creating play listsEditing and playing play lists/chapters Play list operationsMove ChapterEntering text Show Enter Name screenPress 3, 4 To select a Character and press Enter Press SETTransferring dubbing titles or play lists Transfer DubbingOne Touch Transfer dubbing Press DubbingPress Enter to confirm DubbingPress 3, 4 to select Start Dubbing and press Enter Transferring dubbing a finalized DVD-RTo edit the transferring dubbing list DubbingFunctions window Press 3, 4, 2, 1 to select an item and press EnterPress 3, 4, 2, 1 to select Disc Management and press Enter Press 3, 4 to select the operation and press EnterDisc Name Top MenuDisc Protection Format DiscChanging the unit’s settings Common proceduresSummary of settings Convenient functionsTabs Menus Options Underlined items are the factory presets PictureFunctions AV2 Settings TV AspectProgressive TV SystemTuning Press 3, 4 to select Manual and press EnterPress 3, 4, 2 Programme positionAuto-Setup Restart To change the setting all at once PAL!#NTSCPress 3, 4, 2, 1 to select a country and press Enter TV SystemClock settings Child LockSpecifications Safety precautionsGlossary When Showview When programmingLink Message Message appears whenFrequently asked questions Set upPageCover RecordingOn the television Error messagesOn the unit’s display Troubleshooting guide Following do not indicate a problem with this unitBreaks ≥Set the clock DisplayLow volume Cannot switch audioRemote control doesn’t Sound No soundTroubleshooting guide Unit care MaintenanceDisc handling Index RGB
Related manuals
Manual 52 pages 43.42 Kb