![](/images/new-backgrounds/1279327/27932775x1.webp)
TROUBLESHOOTING
5Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this owner’s manual, check the following chart once before calling for service.
Symptom
Remedy
| No power | • Be sure the power cord is plugged in. |
|
| • If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to |
|
| reset itself. |
| No picture or sound | • Check if the power is on. |
|
| • Check the outlet connection. |
|
| • Check the antenna or cable connection to the main unit. |
|
| • When the outside antenna is used, check the wire condition and connection. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
|
| • Turn off the power and wait for about 1 minute, then turn it on again. |
| No color | • Check the antenna or cable connection to the main unit. |
|
| • When the outside antenna is used, check the wire condition and connection. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
|
| • Adjust “COLOR” in “PICTURE“ menu. |
| Sound OK, picture poor | • Check the antenna or cable connection to the main unit. |
|
| • When the outside antenna is used, check the wire condition and connection. |
|
| • Electrical interference from nearby appliances may affect picture quality. |
|
| • Adjust “CONTRAST” and “BRIGHT” in “PICTURE“ menu. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
| Picture distorted | • When the outside antenna is used, check the wire condition and connection. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
| Weak picture | • Check the antenna or cable connection to the main unit. |
|
| • When the outside antenna is used, check the wire condition and connection. |
|
| • Adjust “CONTRAST” and “BRIGHT” in “PICTURE“ menu. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
| Lines or streaks in picture | • When the outside antenna is used, check the wire condition and connection. |
T |
| • Electrical interference from nearby appliances may affect picture quality. |
| • View other TV channels. The problem might be limited to the broadcasting station. | |
V | Picture blurred | • When the outside antenna is used, check the wire condition and connection. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
| Ghosts in picture | • Check the antenna or cable connection to the main unit. |
|
| • When the outside antenna is used, check the wire condition and connection. |
|
| • Electrical interference from nearby appliances may affect picture quality. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
| Bars on TV screen | • When the outside antenna is used, check the wire condition and connection. |
|
| • Electrical interference from nearby appliances may affect picture quality. |
| Picture rolls vertically | • When the outside antenna is used, check the wire condition and connection. |
|
| • Electrical interference from nearby appliances may affect picture quality. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
| Different color marks on TV | • Move your TV away from nearby electric appliances. Turn off the power and wait |
| screen | 30 minutes before turning it back on. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
| Poor reception on some chan- | • Check the antenna or cable connection to the main unit. |
| nels | • When the outside antenna is used, check the wire condition and connection. |
|
| • Electrical interference from nearby appliances may affect picture quality. |
|
| • View other TV channels. The problem might be limited to the broadcasting station. |
| Picture OK, sound poor | • View other TV channels. The problem might be limited to the broadcasting station. |
|
|
|
| No reception of digital signals | • Make sure auto channel scan has been completed (Refer to “Auto Channel Scan” on |
|
| page 12). |
|
| Auto channel scan must be completed when you set up the unit for the first time |
|
| or move it to a location where previously unavailable channels are broadcast. |
|
| • The selected channel may not be broadcasting. |
|
| • When auto channel scan is interrupted and not completed, some channels will not |
|
| be received. Make sure to complete (Refer to “Auto Channel Scan” on page 12). |
38
EN