LOREX Technology instruction manual SG17L7584 Front Secondary Function Buttons

Page 13

SG17L7584 - Front - Secondary Function Buttons

SG17L7584 - Front - Secondary Function Buttons

15 16 17 18 19 20 21 22

15.ALRS (ALARM RESET) BUTTON - To reset an alarm when it is active, press the [FN] button to activate the secondary functions (note that the LED below the button will turn on), and press the ALRS button. The alarm will be reset.

16.PAN / TILT BUTTON - Press the [FN] button to activate the secondary functions followed by the [PT Mode] button to activate the Pan/Tilt functions for Channel 1.

NOTE: Accessory PTZ Camera model SG7380 is required to operate this feature.

17.IR RECEIVER - Infrared receiver for optional Remote Control

18.MIC - Enable TWO-WAY AUDIO with select LOREX cameras

19.MAIN BUTTON - Pressing the Main button while in the PIP, Dual PIP or POP mode will change the camera input of the main screen being displayed.

20.SUB 1 BUTTON - Press the FN button to activate the secondary function, then press the SUB 1 button. This button is used to select the camera that is displayed in the 1st PIP window.

21.SUB 2 BUTTON - Press the FN button to activate the secondary function, then press the SUB 2button. When the Dual PIP mode is selected, this button is used to change the camera that is displayed in the 2nd PIP window.

22.P-SEQ BUTTON (PIP SEQUENCE) - This button is used to sequence the small image or main image in PIP mode, Press the [FN] button while in PIP mode or POP mode, this function will be active. To exit PIP sequencing, press this button again.

13

Image 13

Contents Color LCD Dual Quad Security Surveillance System Page Installation Important SafeguardsService Lorex Technology INC General PrecautionsStandard Camera Features Observation System FeaturesNetViewer Software Table of Contents Getting Started Remote ControlCameras with Camera15 16 17 18 19 20 21 SG17L7584 Front Primary Function ButtonsUP / Down / Right SG17L7584 Front Primary Function Buttons 10 11 12 13 Dual PIP POP ModeListen in Audio only SG17L7584 Front Secondary Function Buttons MIC Enable TWO-WAY Audio with select Lorex camerasSlave Monitor SG17L7584 BackSG17L7584 Back Remote Control Camera Lens Installing CamerasMicrophone Input Cable BackPower Connecting CamerasTo Connect the Cameras to the Moni- tor Observation SystemThumbscrews Monitor FeaturesMonitor Tilting Point Cable Channel Main Menu Control Disp MON Display the Date / Time on Time / Date SetTIME/DATE SET Sequence SET Sequence SetPIP/POP SET PIP/POP SetTitle SET Title SetAlarm SET Alarm SetMotion SET Motion SetFull Screen Loss Buzzer Sets the audible Buzzer on System SetSystem SET System SET Monitor SET Monitor SetNetViewer Installation Requirements Observation System Internet Router Network ConnectivityNot Included Navigate to http//DDNS.strategicvista.net Setting Up Your Ddns AccountDns1.strategicvista.net Finding Your External IP Address Using the Lorex IPEdit ApplicationNetwork Example Router Port ForwardingInternet Router Computer Internal NetworkProblem TroubleshootingCheck Image on the Observation System is too dark or too bright TFT LCD Observation System Specifications Appendix #1Camera Specifications Appendix #2 VCR Note DVR NoteObservation System Single Channel DVR or VCR RCA to BNC Adaptor Connecting to a Multi-Channel DVR Appendix #4DVR Unit Connecting a Slave Monitor Appendix #5 Sensor Connecting Motion / Alarm Device Appendix #61/4 CCD Cameras Included Full Connectivity Diagram Appendix #7Cable DVR Unit Optional AccessoriesCamera CamerasOptional Accessories It’s all on the web