LOREX Technology SG17L7584 Image on the Observation System is too dark or too bright

Page 39

Troubleshooting

Problem:

The image on the Observation System is too dark or too bright

Check:

• Adjust the CONTRAST and BRIGHTNESS of the unit (Refer to the Menu section)

Problem:

The image on the Observation System appears, but does not have sound Check:

•Check the VOLUME

•Check the CAMERA connection to the Observation System

•Confirm that the Camera has sound capabilities (Refer to the manual for the camera model for further information on the Camera functionality)

Problem:

The picture on the Observation System is poor, shrinks or flickers

Check:

•Check the camera video cable and connections

•Disconnect and reconnect the cable at the Observation System and at the Camera

•Clean the camera lens

•Adjust the CONTRAST and BRIGHTNESS settings in the Menu (Page 32)

•Check that the Camera is not in direct sunlight

Problem:

There is no picture appearing on a Channel / Camera is not displaying

Check:

•Check the camera video cable and connections

•Disconnect and reconnect the cable at the Observation System and at the Camera

•Try moving the camera to another channel or use another cable

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Color LCD Dual Quad Security Surveillance System Page Installation Important SafeguardsService Lorex Technology INC General PrecautionsObservation System Features Standard Camera FeaturesNetViewer Software Table of Contents Camera Remote ControlGetting Started Cameras with15 16 17 18 19 20 21 SG17L7584 Front Primary Function ButtonsUP / Down / Right SG17L7584 Front Primary Function Buttons Dual PIP POP Mode 10 11 12 13Listen in Audio only SG17L7584 Front Secondary Function Buttons MIC Enable TWO-WAY Audio with select Lorex camerasSlave Monitor SG17L7584 BackSG17L7584 Back Remote Control Input Cable Back Installing CamerasCamera Lens MicrophoneObservation System Connecting CamerasPower To Connect the Cameras to the Moni- torMonitor Features ThumbscrewsMonitor Tilting Point Cable Channel Main Menu Control Time / Date Set Disp MON Display the Date / Time onTIME/DATE SET Sequence SET Sequence SetPIP/POP SET PIP/POP SetTitle SET Title SetAlarm SET Alarm SetMotion SET Motion SetFull Screen System Set Loss Buzzer Sets the audible Buzzer onSystem SET System SET Monitor SET Monitor SetNetViewer Installation Requirements Network Connectivity Observation System Internet RouterNot Included Navigate to http//DDNS.strategicvista.net Setting Up Your Ddns AccountDns1.strategicvista.net Finding Your External IP Address Using the Lorex IPEdit ApplicationInternal Network Router Port ForwardingNetwork Example Internet Router ComputerTroubleshooting ProblemCheck Image on the Observation System is too dark or too bright TFT LCD Observation System Specifications Appendix #1Camera Specifications Appendix #2 DVR Note VCR NoteObservation System Single Channel DVR or VCR Connecting to a Multi-Channel DVR Appendix #4 RCA to BNC AdaptorDVR Unit Connecting a Slave Monitor Appendix #5 Sensor Connecting Motion / Alarm Device Appendix #61/4 CCD Cameras Included Full Connectivity Diagram Appendix #7Cameras Optional AccessoriesCable DVR Unit CameraOptional Accessories It’s all on the web
Top Page Image Contents