LOREX Technology SG17L7584 Installing Cameras, Camera Lens, Microphone, Input Cable Back, Bracket

Page 17

Installing Cameras

Installing Cameras

The SG17L7584 Observation System includes 4 - 1/4” CCD Color IR Day/Night Indoor/Outdoor Cameras*

INFRA-RED LEDs - Provides illumination for low light conditions

CAMERA LENS -

Delivers CCD Color image to the Observation System using a 6mm lens

MICROPHONE -

Picks up sound near the camera and transmits to the Observation System

INPUT CABLE (BACK) -

Delivers Video / Audio / Power from the Observation System to the Camera

BRACKET -

Metal bracket connects to the Camera for mounting to walls, ceilings and other surfaces

* Picture changes from Color to B&W under low light conditions.

Mounting Bracket Installation

1.Attach the pedestal to the ceiling, wall or other surface by the base using the provided screws.

2.The mounting bracket must be attached to a structural device such as a wall stud or ceiling rafter using the supplied screws.

3.Attach the camera to the pedestal

Adjust the angle of the camera, and tighten the thumbscrew to set the position

Installation Warnings:

Install the camera away from direct sunlight.

Avoid places where humidity is high, or where the camera cannot adequately be protected from the rain or other elements.

17

Image 17
Contents Color LCD Dual Quad Security Surveillance System Page Installation Important SafeguardsService Lorex Technology INC General PrecautionsNetViewer Software Observation System FeaturesStandard Camera Features Table of Contents Getting Started Remote ControlCameras with Camera15 16 17 18 19 20 21 SG17L7584 Front Primary Function ButtonsUP / Down / Right SG17L7584 Front Primary Function Buttons Listen in Audio only Dual PIP POP Mode10 11 12 13 SG17L7584 Front Secondary Function Buttons MIC Enable TWO-WAY Audio with select Lorex camerasSlave Monitor SG17L7584 BackSG17L7584 Back Remote Control Camera Lens Installing CamerasMicrophone Input Cable BackPower Connecting CamerasTo Connect the Cameras to the Moni- tor Observation SystemMonitor Tilting Point Monitor FeaturesThumbscrews Cable Channel Main Menu Control TIME/DATE SET Time / Date SetDisp MON Display the Date / Time on Sequence SET Sequence SetPIP/POP SET PIP/POP SetTitle SET Title SetAlarm SET Alarm SetMotion SET Motion SetFull Screen System SET System SetLoss Buzzer Sets the audible Buzzer on System SET Monitor SET Monitor SetNetViewer Installation Requirements Not Included Network ConnectivityObservation System Internet Router Navigate to http//DDNS.strategicvista.net Setting Up Your Ddns AccountDns1.strategicvista.net Finding Your External IP Address Using the Lorex IPEdit ApplicationNetwork Example Router Port ForwardingInternet Router Computer Internal NetworkCheck TroubleshootingProblem Image on the Observation System is too dark or too bright TFT LCD Observation System Specifications Appendix #1Camera Specifications Appendix #2 Observation System Single Channel DVR or VCR DVR NoteVCR Note DVR Unit Connecting to a Multi-Channel DVR Appendix #4RCA to BNC Adaptor Connecting a Slave Monitor Appendix #5 Sensor Connecting Motion / Alarm Device Appendix #61/4 CCD Cameras Included Full Connectivity Diagram Appendix #7Cable DVR Unit Optional AccessoriesCamera CamerasOptional Accessories It’s all on the web