Alarm Set
Alarm Set
This submenu allows you to configure the ALARM alert type and duration.This alarm type is used in conjunction with external alarm input terminals. PIR cameras are offered by LOREX, but are not
included with this system.
1.ALARM - Configures the ALARM type for an alarm event. Navigate by pressing the K and L buttons to highlight, and press the OK button to switch between DISPLAY modes:
•OFF - Alarm function is turned OFF
•OSD (On Screen Display) - When the alarm occurs, the OSD displays [AL] in the corresponding screen location.
•OSD + BUZZER - When an Alarm occurs, the OSD [AL] appears on the corresponding screen location, and a Buzzer will sound for the set alarm period.
2.CH1 - CH8 - Set the alarm mode for cameras 1 through 8.
•Change the Alarm Interval - Navigate by pressing the K and L buttons to highlight the
number of seconds, and press the OK button to select. Use the K and L buttons to change the number of seconds for alarm display, and press the OK button to accept the change.
•Press the I and J buttons to highlight the alarm type OK button to change between alarm modes. Alarm Modes include OFF (no alarm), N/O (Normally Open) and N/C (Normally Closed). Press OK to accept the change.
[ALARM SET] |
| |
ALARM | : [OFF] |
|
CH1 | : 10 SEC | [N/O] |
CH2 | : 10 SEC | [N/O] |
CH3 | : 10 SEC | [N/O] |
CH4 | : 10 SEC | [N/O] |
CH5 | : 10 SEC | [N/O] |
CH6 | : 10 SEC | [N/O] |
CH7 | : 10 SEC | [N/O] |
CH8 | : 10 SEC | [N/O] |
RETURN | : [ ] |
|
EXIT | : [ ] |
|
|
|
|
NOTE: This N/O N/C Setting is for the external alarm input terminal ONLY, and will not affect the PIR cameras offered by Lorex.
3.RETURN - Return to the MAIN MENU. Navigate by pressing the K and L buttons to highlight, and press the OK button to select
4.EXIT - Return to the camera view. Navigate by pressing the K and L buttons to highlight, and press the OK button to select
26