Adjust contrast
You can set the display's contrast as follows:
1.Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears.
2.With the or button t select "SYSTEM SETUP" and confirm with the OK button k.
3.With the or button t select "CONTRAST SETUP" and confirm with the OK button k.
4.In the LCD display q the contrast value now blinks which you can set with the or button t.
Display readout:
0 = highest contrast:
15 = lowest contrast
5.With the OK button k you can save the desired setting. The notice "CONTRAST SETUP" appears again.
Background Illumination
You can set the length of time that the background of the LCD display q stays illuminated after the end of operation. Thereby taking into account that the longer the illumination remains lit the shorter the battery life will be.
1.Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears.
2.With the or button t select "SYSTEM SETUP" and confirm with the OK button k.
3.With the or button t select "BACKLIT SETUP" and confirm with the OK button k.
4.In the LCD display q now blinks the second count for the length of time that the light is to be left on which you can set with the buttons t from 0 to 60. If you select
"0" the background illumination will shut off completely.
5.With the OK button k you can save the desired setting. The notice "BACKLIT SETUP" appears again.
System reset
Via this function you can reset the URC to its factory default settings. Thereby all settings made by you will be deleted.
1.Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears.
2.With the or button t select "SYSTEM SETUP" and confirm with the OK button k.
3.With the or button t select "SYSTEM RESET" and confirm with the OK button k.
4.In the LCD display q now appears "CONFIRM RESET" confirm the reset with the OK button k. All settings are now deleted and the menu will end.
- 14 -