Kompernass KH 2156 manual System-Setup, Setting the time, Setting the date

Page 15

System-Setup

Setting the time

The LCD display q shows you the time of day. You set this as follows:

1.Hold down the S button r for a little longer than 3 seconds. The notice "CODE SETUP" appears. If appox. 15 seconds passes without an entry the device exits the menu and returns to the standard display.

2.With the or button t select "SYSTEM SETUP" and confirm with the OK button k.

3.In the LCD display q "TIME SETUP" appears. Confirm with the OK button k. The LCD display q now shows "TIME" and the time format (24 HR) blinks.

4.With the or button t you can switch to the other time format (12 HR AM/PM). Thereby "AM" stands for "ante meridium" (= morning, 0:00 to 12:00 o'clock) and "PM" stands for "post meridium" (= afternoon, 12:00 to 0:00 o'clock). Press the OK button k to confirm.

5.Now the hour indicator blinks. With the or button t select the hour number for the present time of day and press the OK button k.

6.Now the minute indicator blinks. With the or button t select the minute number for the present time of day and press the OK button k to save. The "TIME SETUP" notice appears again.

7.To exit this or the following menus press repeatedly the EXIT button y until the standard display appears in the LCD display q.

Setting the date

The LCD display q shows you the date when you press the S button r. You set the date in this way:

1.Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears.

2.With the or button t select "SYSTEM SETUP" and confirm with the OK button k.

3.In the LCD display q "TIME SETUP" appears. Press the button t to change to "DATE SETUP". Confirm with the

OK button k.

4.In the display the year "2009" blinks. With the or

button t you can change the year and confirm with the OK button k. With the or button t you can change the now blinking month and confirm with the OK button k. Now the day indicator blinks which you can also change with the or button t.

5.To save press the OK button k. The "DATE SETUP" notice appears again.

- 13 -

Image 15
Contents Universal Remote Control Page Index Device at a future date Important safety instructionsDamage to the device Device summaryUnpacking the device / checking the package contents Initial useInserting the batteries LCD display Operating componentsALL OFF button. w ButtonsButton for one/two digit programme numbers a AV button d Switch to the AV inputCH +/- buttons u Change the reception channel Macro button Number buttons oSetup System settings Page Code Setup Programming the remote control Programming by brand code search= a = D = G = J = M = P = T Programming by automatic code search Programming by manual code inputMute Switching 1$ OK button k Display the year 2009 blinks. With the  or System-SetupSetting the time Setting the dateYou can set the displays contrast as follows Adjust contrastSystem reset Background IlluminationTimer Setup Sleep timerEvent timer Code learn function Learn SetupMacro Setup Press the Macro button Execute a MacroFavourites channel To delete all MacrosRepeat the steps to apply further favourites Volume control Vol +/-, Mute switchingThese devices have their own volume adjustment Faults / Remedies For operationAll OFF Disposal Importer Technical dataImportant Warranty Notices CE- Conformity