Kompernass KH 2156 manual Execute a Macro, Press the Macro button

Page 20

To programme a Macro

For Macro programming proceed as follows:

1.Hold down the S button r for a little longer than 3 sec- onds. The notice "CODE SETUP" appears.

2.With the or button t select "MACRO SETUP" and confirm with the OK button k. In the display "MACRO SETUP 1" appears.

3.With the or button t select the memory slot to be programmed (MACRO SETUP 1 - 4) and confirm with the

OK button k.

4.In the LCD display q "MACRO STEP" appears. Now press, one after the other, the desired buttons (max. 16). The sequence should begin with a device button e.

5.When the maximum number of button commands is reached the LCD display q shows "FULL".

6.Save the entry with the S button r. In the LCD display q "MACRO SETUP" appears.

7.If, with the selection of the Macros to be programmed (step 3), you select a memory slot that is already occupied the existing Macro will be overwritten.

8.Repeat the process from step 3 to create further Macros.

9.With the EXIT button y you move a level upwards in the menu except during the entry of the button commands.

Tips:

1.A maximum of 16 button commands can be saved in a Macro. After entering the 16 button commands the Mac- ro is automatically saved and in the LCD display q "FULL" appears.

2.To exit the mode without saving allow approx. 15 sec- onds to pass without an entry.

3.In the mode "MACRO STEP" you can only return to the previous status with the S button r.

Example: You want to save a command chain in a Macro. We begin in the mode "MACRO STEP".

Desired command chain: Switch on TV => switch to the AV input => switch on DVD and playback.

In the mode "MACRO STEP", for this you enter the following

button commands: => => => => =>

Execute a Macro

To execute a pre-programmed Macro proceed as follows:

1.Press the MACRO button i.

2.With the corresponding number button o you access the desired Macro (1-4). Example: If Macro 3 is to be imple- mented press first the Macro button i and then, within 5 seconds, the number button "".

- 18 -

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Universal Remote Control Page Index Important safety instructions Device at a future dateDevice summary Damage to the deviceInserting the batteries Unpacking the device / checking the package contentsInitial use Operating components LCD displayButtons ALL OFF button. wAV button d Switch to the AV input CH +/- buttons u Change the reception channel Macro buttonNumber buttons o Button for one/two digit programme numbers aSetup System settings Page = a = D = G = J = M = P = T Code Setup Programming the remote controlProgramming by brand code search Programming by manual code input Programming by automatic code searchMute Switching 1$ System-Setup Setting the timeSetting the date OK button k Display the year 2009 blinks. With the  orAdjust contrast System resetBackground Illumination You can set the displays contrast as followsEvent timer Timer SetupSleep timer Learn Setup Code learn functionMacro Setup Execute a Macro Press the Macro buttonRepeat the steps to apply further favourites Favourites channelTo delete all Macros These devices have their own volume adjustment Volume controlVol +/-, Mute switching All OFF Faults / RemediesFor operation Disposal Technical data Important Warranty NoticesCE- Conformity Importer
Top Page Image Contents