Initial use
Unpacking the device / checking the package contents
Important!
Keep the plastic packaging well away from small children. There is a risk of suffocation!
•Unpack the device and accessories.
•Check the package contents
-Universal remote control (URC),
-Operating instructions,
-Manufacturers directory with device code list:
-2 x 1,5 V Batteries, type AAA/LR03 (Micro)
•Remove the protective foil from the LCD display q.
Note: Transport damage
If you notice any transport damage contact the manufacturer or the manufacturer's
Inserting the batteries
Attention!
The Universal remote control must only be operated with 1.5 Volt batteries (Type AAA, LR03).
Carry out the battery change as quickly as possible. Preset settings will remain saved for approx. 1 minute. If new batter- ies have not been installed within this time all of the settings will have to be carried out again. The time of day will, how- ever, in any case be deleted.
1.Open the battery compartment cover 2) in the direction of the arrow.
2.Insert the batteries as shown in the diagram and close the battery compartment.
The LCD display q is activated as long as batteries are installed. The following diagram shows the LCD display q after the batteries have been installed or changed.
- 4 -