INITIAL SETTING
5Main Menu
This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.
5Auto Channel Scan
If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.
Press [SETUP] to display the main menu. e.g.) digital TV mode
- TV SETUP -
CHANNEL SETUP |
|
| |
LANGUAGE | [ENGLISH] |
CAPTION | [OFF] |
BACK LIGHT | [BRIGHT] |
COLOR TEMP. | [NORMAL] |
DTVCC |
|
• CHANNEL SETUP
You can automatically scan the viewable channels and remove those that are undesired.
(Refer to “Auto Channel Scan” on page 14.)
•
You can set the viewing limitations. (Refer to
•LANGUAGE
You can change the language (English, Spanish, French) displayed on the main menu.
(Refer to “Language Selection” on page 15.)
• CAPTION
You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen.
(Refer to “Closed Caption” on page 21.)
• BACK LIGHT
You can set the desired brightness mode. (Refer to “Back Light Setting” on page 23.)
• COLOR TEMP
You can adjust color temperature (“NORMAL”, “WARM” and “COOL”). (Refer to “Color Temperature” on page 24.)
•DTVCC
In addition to the basic closed caption described on page 21, DTV has its own closed caption called DTVCC. (Refer to “DTV Closed Caption” on page 22.)
Before you begin:
Make sure if the unit is connected to antenna or cable.
1Press [SETUP] to display the main menu.
2Use [Cursor K/L] to select “CHANNEL SETUP”, then press [ENTER].
e.g.) digital TV mode
| - TV SETUP | - |
or | CHANNEL SETUP | |
| ||
| LANGUAGE | [ENGLISH] |
| CAPTION | [OFF] |
| BACK LIGHT | [BRIGHT] |
| COLOR TEMP. | [NORMAL] |
| DTVCC |
|
|
|
|
3Use [Cursor K/L] to select your desired preset type, then press [ENTER].
e.g.) digital TV mode
or
ADD/DELETE (DTV)
AUTO PRESET CH (DTV) AUTO PRESET CH (TV/DTV) AUTO PRESET CH (CATV)
! CATV takes approx. 50min.
•When aerial antenna is connected, select “AUTO PRESET CH(TV)”, “AUTO PRESET CH(DTV)” or “AUTO PRESET CH(TV/DTV)”.
•When connected to CATV, select “AUTO PRESET CH (CATV)”.
•Scanning and memorizing the channels automatically start.
e.g.) digital TV mode
D25
AUTO PRESET CH(DTV)
• When the scanning and memorizing are completed, the lowest memorized channel will be displayed.
• When you selected “AUTO PRESET CH(TV/DTV)”, the lowest memorized analog channel will be displayed when the scanning and memorizing are completed. If there is no analog channel, the lowest memorized digital channel will be displayed.
14
EN