Emerson LD200EM8 Entered channel number, Changes automatically, For analog broadcasts, Control

Page 44

TROUBLESHOOTING

Symptom

Remedy

 

The entered channel number

• Many digital channels have alternate channel numbers. The unit changes the numbers

 

changes automatically

automatically to the ones signifying the broadcasting stations. These are the numbers used

 

 

for analog broadcasts.

 

Remote control does not work

• Check the antenna or cable connection to the main unit.

 

 

• Check the batteries of the remote control.

 

 

• Check if there is an obstacle between the infrared sensor window and the remote

 

 

control.

 

 

• Test the signal output. If OK, then possible remote sensor trouble.

 

 

(Refer to “IR Signal Check” on page 45.)

 

 

• Aim the remote control directly at the infrared sensor window on the front of the unit.

 

 

• Reduce the distance to the unit.

 

 

Re-insert the batteries with their polarities (+/– signs) as indicated.

 

 

Problems with Closed Caption Feature

 

 

 

T

Misspelled captions are

• Closed captioning production companies may broadcast programs without

V

displayed.

correcting the misspelling in a live broadcast.

Captions are not entirely

• Captions that are delayed a few seconds behind the actual dialogue are common for

 

displayed, or captions are

live broadcasts. Most captioning production companies can display a dialogue to a

 

delayed behind the dialogue.

maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is

 

 

used to insure that the captions remain up-to-date with the current TV screen dialogue.

 

Captions are displayed as a

• Interference from buildings or weather conditions may cause captioning to be

 

white box.

incomplete.

 

No caption is displayed in the

• Broadcasting station may shorten the program to insert advertisement. The closed

 

Closed Caption-supported

caption decoder cannot read the information of the shortened program.

 

program.

 

 

No caption is displayed

• The videotape may be illegally copied, or the caption signal might not have been

 

when playing the videotape

read during copying.

 

containing captions.

 

 

Black box is displayed in the

• “Text” mode is selected for caption. Select “CAPTION1”, “CAPTION2” or “OFF”.

 

screen.

 

 

Completely distorted picture

• Make sure the disc is compatible with the unit.

 

or black/white picture with

 

 

DVD

 

 

Picture freezes momentarily

• Check the disc for finger prints/scratches and clean with a soft cloth wiping from

 

during playback.

center to edge.

 

Disc cannot be played.

• Clean the disc.

 

 

• Ensure the disc is correctly inserted.

 

 

• Check if the disc is defective by trying another disc.

 

 

• Cancel the parental lock or change the control level.

D

 

• Insert a correct disc that plays on this unit.

 

• Handle a disc with special care so that it does not have fingerprints, scratches, or

V

 

dusts on its surface.

Buttons do not work or the

• To completely reset the unit, unplug the power cord from the power outlet for

D

unit stops responding.

5-10 seconds.

 

The unit does not respond to

• Operations may not be permitted by the disc. Refer to the instructions of the disc.

 

some operating commands

 

 

during playback.

 

 

Angle does not switch.

• The angle cannot be switched for DVD which do not contain multiple angles. In

 

 

some cases multiple angles are only recorded for specific scenes.

 

Playback does not start

• Check the “PARENTAL” setting.

 

when the title is selected.

 

 

The password for rating level

• Enter the default password “4737”, then your forgotten password will be cleared.

 

has been forgotten.

 

Note:

The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

Playback from a desired track and random playback are not available during program playback.

Some functions are prohibited on some discs.

44

EN

Image 44
Contents LD200EM8 Introduction Important note is located on the rear of the cabinetPrecautions Laser SafetyRADIO-TV Interference Important Copyright Information5Tilt Stand 5Supplied Accessories5Symbols Used in this Manual Repeat A-B Playback ContentsGeneral Specifications Features DTV/TV/CATV5Remote Control Function REV E button p295Control Panel 5Rear Panel Connection 5Basic ConnectionAntenna Cable Connection Connection to Cable Box or Satellite BoxVideo Cable Connection 5External Device ConnectionComponent Video Cable Connection Video Connection Digital Audio Output ConnectionInitial Setting 5Initial SetupMake sure if the unit is connected to antenna or cable Scanning and memorizing the channels automatically start5Main Menu 5Auto Channel ScanEnglish Español Français Press Setup to exit5Language Selection 5Channel Selection 5Volume AdjustmentWatching TV 5Switching Each Mode 5Switching Audio ModeMain SAP5Screen Information Press DisplayBroadcasting Information Program Guide5TV Screen Display Mode 5Sleep TimerTo Cancel the Sleep Timer LetterboxOptional Setting 5Picture Adjustment5Channel Add/Delete Brightness Contrast Color Tint SharpnessPress Setup to display the main menu Caption Mode CAPTION1 and TEXT15Closed Caption OFF CAPTION1 CAPTION2 TEXT1 TEXT25DTV Closed Caption 5DTVCC Style5Back Light Setting 5Color Temperature You can adjust color temperature of the TV screenChange Password ChipTV Rating To Set the Sub RatingsChange Password Use Cursor K/L to select Change PASSWORD, then press EnterEnter password again in Confirm PASSWORD. space Mpaa RatingOperating DVD DVD Functions 5Playable Media5Unplayable Media Any other discs without compatibility indicationsPlayback 5DVD Menu5Resume Playback PauseStep-by-step Playback 5Fast Forward / Fast Reverse5Slow Forward / Slow Reverse 5ZoomChapter / Title Search During playback, press Mode repeatedly until appears5Search Functions Time Search Direct Search5Repeat Playback 5Repeat A-B PlaybackStop mode, press Mode repeatedly until Random menu appears 5Programmed Playback5Random Playback Press Play B to start random playback5On-screen Display Introduction5Special Settings Subtitle LanguageAudio Language Camera AnglesBlack Level Setting Stereo Sound ModeUse Cursor K/ L to adjust the black level Virtual SurroundMarker Setup To set a markerDVD Setting 5DVD Language SettingEnter Audio *1, *2Use Cursor K/L to select CUSTOM, then press Enter 5Display SettingUse Cursor K/L to select DVD SETUP, then press Enter 5DVD Audio Setting Use Cursor K/L to select AUDIO, then press Enter5Parental Setting Use Cursor K/L to select PARENTAL, then press EnterParental Level Use Cursor K/L to select Parental LEVEL, then press EnterUse Cursor K/L to select OTHERS, then press Enter OthersYou can change the other functions 5Reset to the Default Setting 5Language Code ListUse Cursor K/L to select INITIALIZE, then press Enter Use Cursor K/L to select YES, then press EnterTroubleshooting 5Troubleshooting GuideCheck the batteries of the remote control Refer to IR Signal Check onDelayed behind the dialogue Entered channel numberMaintenance InformationGlossary Atsc5General Specifications 5Electrical Specification5Other Specifications 5Cable Channel DesignationsMemo Limited Warranty