Emerson LD200EM8 owner manual 5Switching Each Mode, 5Switching Audio Mode, Main, Sap, Mono

Page 17

5Switching Each Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit.

1Press [INPUT] repeatedly to cycle through analog TV, digital TV, VIDEO1 and VIDEO2.

[ANALOG MODE]

[DIGITAL MODE]

[VIDEO1]

[VIDEO2]

•To use the video or S-video input jack on the unit, select “VIDEO1”.

•To use the component video input jack on the unit, select “VIDEO2”.

Note:

•When you switch the analog mode to the digital mode, it may take a while until the digital channel selection is completed. The following TV screen is displayed while switching the mode.

NOW SCANNING

5Switching Audio Mode

This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.

TV

While receiving an MTS broadcast, press [AUDIO] repeatedly to cycle through the available audio channel.


			[MAIN]


			[SAP]


			[MONO]
MAIN
MAIN		: Outputs main-audio
SAP		: Outputs second audio program
MONO		: Outputs mono-audio

•The current mode will automatically disappear in 10 seconds.

DTV

1Press [AUDIO] to display the currently selected language and the number of available languages.

KABC

CH 95-03

A Day of Memories

ENGLISH 1/3

2Press [AUDIO] repeatedly to cycle through the available audio languages.

[ENGLISH]

[SPANISH]

[FRENCH]

•Available languages differ depending on the broadcast.

•The current mode will automatically disappear in 10 seconds.

Note:

• Pressing [AUDIO] does not control external audio device.

INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION

17

EN

Image 17

Contents LD200EM8 Important note is located on the rear of the cabinet IntroductionLaser Safety PrecautionsRADIO-TV Interference Important Copyright Information5Tilt Stand 5Supplied Accessories5Symbols Used in this Manual Repeat A-B Playback ContentsGeneral Specifications DTV/TV/CATV FeaturesREV E button p29 5Remote Control Function5Control Panel 5Rear Panel 5Basic Connection ConnectionAntenna Cable Connection Connection to Cable Box or Satellite BoxVideo Cable Connection 5External Device ConnectionComponent Video Cable Connection Digital Audio Output Connection Video Connection5Initial Setup Initial SettingMake sure if the unit is connected to antenna or cable Scanning and memorizing the channels automatically start5Auto Channel Scan 5Main MenuEnglish Español Français Press Setup to exit5Language Selection 5Channel Selection 5Volume AdjustmentWatching TV 5Switching Audio Mode 5Switching Each ModeMain SAPPress Display 5Screen InformationBroadcasting Information Program Guide5Sleep Timer 5TV Screen Display ModeTo Cancel the Sleep Timer Letterbox5Picture Adjustment Optional Setting5Channel Add/Delete Brightness Contrast Color Tint SharpnessCaption Mode CAPTION1 and TEXT1 Press Setup to display the main menu5Closed Caption OFF CAPTION1 CAPTION2 TEXT1 TEXT25DTVCC Style 5DTV Closed Caption5Back Light Setting You can adjust color temperature of the TV screen 5Color TemperatureChange Password ChipTo Set the Sub Ratings TV RatingUse Cursor K/L to select Change PASSWORD, then press Enter Change PasswordEnter password again in Confirm PASSWORD. space Mpaa RatingDVD Functions 5Playable Media Operating DVD5Unplayable Media Any other discs without compatibility indications5DVD Menu Playback5Resume Playback Pause5Fast Forward / Fast Reverse Step-by-step Playback5Slow Forward / Slow Reverse 5ZoomChapter / Title Search During playback, press Mode repeatedly until appears5Search Functions Direct Search Time Search5Repeat Playback 5Repeat A-B Playback5Programmed Playback Stop mode, press Mode repeatedly until Random menu appears5Random Playback Press Play B to start random playbackIntroduction 5On-screen DisplaySubtitle Language 5Special SettingsAudio Language Camera AnglesStereo Sound Mode Black Level SettingUse Cursor K/ L to adjust the black level Virtual SurroundTo set a marker Marker Setup5DVD Language Setting DVD SettingEnter Audio *1, *2Use Cursor K/L to select CUSTOM, then press Enter 5Display SettingUse Cursor K/L to select DVD SETUP, then press Enter Use Cursor K/L to select AUDIO, then press Enter 5DVD Audio SettingUse Cursor K/L to select PARENTAL, then press Enter 5Parental SettingParental Level Use Cursor K/L to select Parental LEVEL, then press EnterUse Cursor K/L to select OTHERS, then press Enter OthersYou can change the other functions 5Language Code List 5Reset to the Default SettingUse Cursor K/L to select INITIALIZE, then press Enter Use Cursor K/L to select YES, then press Enter5Troubleshooting Guide TroubleshootingRefer to IR Signal Check on Check the batteries of the remote controlDelayed behind the dialogue Entered channel numberInformation MaintenanceGlossary Atsc5Electrical Specification 5General Specifications5Other Specifications 5Cable Channel DesignationsMemo Limited Warranty