Black Level Setting
DVD
Adjust the black level to make the dark areas of the TV picture brighter.
1During playback, press [MODE] repeatedly until ““ appears.
OFF (BLACK LEVEL)
2Use [Cursor K/ L] to adjust the black level.
or | ON (BLACK LEVEL) |
|
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
3Press [RETURN] to exit.
Virtual Surround
You can enjoy virtual surround on your existing 2 channel stereo system.
1During playback, press [MODE] repeatedly until ““ appears.
OFF (SURROUND)
2Use [Cursor K/ L] to select the sound level.
or | 1 (SURROUND) |
|
1: Natural effect
2: Emphasized effect
OFF : No effects (original sound)
3Press [RETURN] to exit.
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING
Note:
• The setting will be kept even if the unit is turned off.
Stereo Sound Mode
CD
This unit allows you to select a sound mode during audio CD playback.
During playback, press [AUDIO] repeatedly until the desired sound mode appears.
STEREO
•Each time you press [AUDIO], the sound mode changes as example below.
STEREO (stereo sound with left and right channels)
Note:
•Virtual surround cannot be changed when the sound mode is set to either
Note:
•The setting will be kept even if the unit is turned off.
•For audio CD, virtual surround will not be effective if the sound mode is set to something other than “STEREO”. See “Stereo Sound Mode”.
•Turn down the level or select “OFF” if the sound is distorted.
OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
35
EN