Emerson EWL20D6 owner manual Picture Control, Back Light Setting, Sleep Timer

POWER PICTURE SELECT EJECT

7	8	93
SLEEP		+100	VOL.
	0	+10
SKIP		ZOOM	MUTE
	PLAY
REV			FWD
	STOP
PAUSE	SLOW		DISC
			MENU
DISPLAY
		ENTER
SETUP	TITLE		RETURN
CLEAR	SEARCH MODE	REPEAT	A-B

MODE AUDIO SUBTITLE ANGLE

•Shaded buttons are used for following operation.

PICTURE CONTROL

The unit’s picture controls, brightness, contrast, color, tint and sharpness, are preset to factory specifi- cations. Although they are usually the best, you may need to make some further adjustments for a more natural looking image.

1 Press [PICTURE] then press [K] or [L] to select the desired control “BRIGHTNESS”, “CONTRAST”, “COLOR”, “TINT” or “SHARP- NESS”.

PICTURE

BRIGHTNESS

- +

2 Press [s] or [B] to adjust to your desired level within 5 seconds.

BRIGHTNESS	to decrease	to increase
	brightness	brightness
CONTRAST	to decrease	to increase
	contrast	contrast
COLOR	to pale	to brilliant
TINT	to purple	to green
SHARPNESS	to soft	to clear

•Even if there is a power failure of any kind, the unit will retain its memory for this feature.

BACK LIGHT SETTING

1 Press [SETUP] then press [K] or [L] to point to “BACK LIGHT”.

	- TV SET UP -
	CHANNEL SET UP
SETUP	V-CHIP SET UP
	LANGUAGE	[ENGLISH]
	CAPTION	[OFF]
	B BACK LIGHT [BRIGHT]

2 Press [ENTER] then press [s] or [B] to select to “BRIGHT”, “NORMAL” or “DARK”.

ENTER

3 Press [SETUP].

SETUP

SLEEP TIMER

The Sleep Timer function turns off the unit without using [POWER] after a desired period of time.

1 Press [SLEEP].

SLEEP

SLEEP 0 MINUTE

2 Press [SLEEP] repeatedly until the desired sleep time is displayed.

SLEEP

•Each press increases the time by 10 minutes up to 90 minutes.

•After 5 seconds, the Sleep Timer setting will disappear automatically.

•If you select “SLEEP 0 MINUTE”, Sleep Timer setting is canceled.

TV OPERATION AND SETTINGS

TV SECTION

NOTE

•The picture control display will disappear automati- cally after 10 seconds unless you press any buttons.

- 13 - EN