2.Exit the vehicle and press the 
button on the remote (the vehicle shuts down when locking).
3.Press the 
button on the remote 3 times and then press the 
button. The parking lights flash 5 times fast to confirm the remote is in Smart Start mode.
The vehicle remote starts when the cabin temperature reaches the pro- grammed threshold, or when the battery reaches the programmed voltage.
Use one of the below methods to exit Smart Start mode:
•Perform the same steps to activate Smart Start mode
•Turn the ignition On to deactivate manually
•Press the brake pedal
The parking lights flash 5 times slowly to confirm the remote has exited Smart Start mode.
➤Turning on the rear defogger
The rear defogger (if connected) is programmed to automatically acti- vate when remote start is turned on. If the interior cabin temperature is above 55˚ F the defogger will not activate.
To manually activate the rear defogger after remote start is on:
•Press 
four times, and then press 
. The parking lights flash 4 times to confirm the defogger activation.
30 | © 2008 Directed Electronics. All rights reserved. |