command operations. When locked, if any command button is pressed the remote emits an error tone.
•The keypad lock feature is Off when the remote beeps twice and the keypad does not lock.
If the keypad lock is On, press 
, and then press 
to unlock the keypad.
Note: If the auto keypad lock feature is programmed On, the remote un- locks when the vehicle ignition is turned Off. The remote stays unlocked to allow time to exit and unload the vehicle, and then lock the doors with the remote. When the 
button is pressed, the keypad auto lock feature resumes normally.
Remote Beeps feature
Press the 
button to turn the Remote Beeps feature On and Off.
When the remote beeps once, the feature is on, the remote then beeps when pressing any button on the remote or when programming features on the remote.
When the remote beeps twice, the feature is off, the remote does not beep when pressing any button on the remote but does beep when programming features on the remote.
➤Panic mode
If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter. Just press 
for 2 seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic Mode at any time, press 
on the remote transmitter again.
24 | © 2008 Directed Electronics. All rights reserved. |