Dolby Laboratories P/N 91659 manual Input and Output Settings

Page 27

DolbyRemote Installation and Operation

Dolby Digital Parameters

 

 

 

 

4.5Input and Output Settings

Figure 4-6Input/Output Tab

4.5.1Input

Lock Status

Lock Status shows whether the input channels for the current coding mode have been detected and locked by the encoder.

Sample Rate

Sample Rate shows the sample rate of the digital input channels.

Integrity

Integrity shows the data integrity of the digital input channels.

Format

Format is a control parameter that allows you to choose the format of the data received from the input source. Available Input Format selections are:

PCM: Dolby Digital encoding will be enabled. When analog is selected as the DP567 input source, the input format must always be PCM.

Pre-encoded: Pass-through mode will be enabled. Pre-encoded bitstreams move through the unit, unmodified, to the output.

4-11

Image 27
Contents DolbyRemote Far East Dolby Laboratories IncCorporate Headquarters European Licensing Liaison OfficeTable of Contents Opening a Device Further Information DolbyRemote Open Device Window List of FiguresPage PC System Requirements DolbyRemote OverviewDolbyLoad RequirementsEncoder Firmware Software InstallationMicrosoft DLL Files Cable InstallationPage Port Starting DolbyRemoteDevice Type CommunicationsAddress Off-Line3DolbyRemote Window Additional DevicesRemoving Devices Save Configuration File Saving and Restoring ConfigurationsExporting Configurations Open Configuration FilePage Input Meters Audio Service ParametersAudio Coding Mode Data RateClock Source LFE Enable Bitstream ModeDialog Normalization Bypass Audio BandwidthEncoder Control Pass ThroughUnit Name Coding DelayInput Filtering PreprocessingDynamic Range Compression Surround Channel ProcessingInput Level Meter Line Mode and RF ModeBitstream Info Bitstream InformationAudio Production Information Dual MonoMix Level, Room Type and Info Exists Audio Service ConfigurationInput Level, Line Mode and RF Mode Dialog NormalizationInput Input and Output SettingsChannel Assignment OutputAux Data SourceAudio Bit Multiplex ModeInput Subcode Status Bits Test Tone GenerationInput Reference InputStream Number Reference InputStream Number PresetsReference Input Subcode Status Bits RecallNumber ConfigureSave Current Configuration Time Code ParametersStatus PresetCurrent Time Code Start Time Code and Stop Time Code ValuesResume Select Stereo Music in the Preset Pending fieldGeneral Opening a DeviceDP569/DP567 DP561Am 530 p.m., Monday Friday Further Information