Dolby Laboratories P/N 91659 manual Opening a Device Further Information

DolbyRemote Installation and Operation

4.4	Dual Mono		4-9
	4.4.1	Audio Service Configuration	4-10
	4.4.2	Dynamic Range Compression	4-10
	4.4.3	Audio Production Information	4-10
4.5	Input and Output Settings		4-11
	4.5.1	Input	4-11
	4.5.2	Output	4-12
	4.5.3 Input Subcode Status Bits		4-13
	4.5.4	Test Tone Generation	4-13
	4.5.5	Stream Number	4-14
4.6	Reference Input		4-14
	4.6.1	Reference Input	4-14
	4.6.2 Reference Input Subcode Status Bits		4-15
4.7	Presets	.....................................................................................................................	4-15
	4.7.1	Recall	4-15
	4.7.2	Configure	4-15
4.8	Time Code Parameters		4-16
	4.8.1	Input	4-16
	4.8.2	Current Time Code	4-17
	4.8.3 Start Timec Code and Stop Time Code Values		4-17
	4.8.4	Preset	4-17
	4.8.5	Resume	4-18
Chapter 5 Troubleshooting			5-1
5.1	Opening a Device		5-1
5.2	Further Information		5-2

iv