Grundig GDP 9550 manual Connecting a television or flat screen

CONNECTION AND PREPARATION_

Note:

Do not connect any other equipment while the device is switched on. Switch off the other equipment as well before connecting it. Only plug the device into the mains socket after you have connected the external devices.

Connecting a television or flat screen

You have three options, depending on the sockets you have on your television or flat screen:

–You get the best picture quality by making the connection at the EURO-AV socket using a fully assigned EURO-AV cable.

–The standard connection for many devices, and one which provi- des good quality, is via the S-VIDEO OUT socket and the AUDIO OUT cinch sockets.

–The simplest option which still offers sufficient quality is connecting to the video socket and the audio sockets with a cinch cable.

Necessary adjustments to the television or the flat screen

After you have made the connections at the selected output sockets, you must activate them. The setting procedure is described in the ”Selecting the video output socket (EURO AV/RGB or S-video)” section on page 16.

If the DVD player is connected to a television set or a flat screen with a 16:9 format, observe the settings described in the ”Selecting the television format” section on page 17.

The colour standard of the DVD player must be matched to the colour standard of your television or flat screen. The setting proce- dure is described in the section ”Setting the TV system (TV norm)” on page 16.

Connect the »EURO AV ➞ TV« socket directly to the television or the flat screen, and not indirectly via a video recorder. This can cause difficulties when playing back copy-protected DVDs/CDs.

ENGLISH

11