Grundig GDP 9550 manual Connecting the power cord, Inserting batteries in the remote control

CONNECTION AND PREPARATION_

Connecting an audio system with analogue two-channel stereo sound

As an alternative to using the television’s speakers, the sound can also be played back through an audio system. This can improve audio playback.

R	L
	AUDIO	L		VIDEO OUT	100-240 V~
	INPUT				50/60 Hz 10 W
		R		S VIDEO OUT
	DIGITAL AUDIO OUT	AUDIO OUT	EURO AV	TV

	L		VIDEO OUT
	R		S VIDEO OUT
DIGITAL AUDIO OUT	AUDIO OUT	EURO AV	TV

1Plug a standard cinch cable into the »AUDIO OUT L R« socket of the DVD player and into the corresponding socket on the audio system.

Caution:

Do not connect the »AUDIO OUT L R« socket on the DVD player to the PHONO (record player) input socket on the audio system.

Connecting the power cord

100-240 V~

50/60 Hz 10 W

1Plug the power cord into the wall socket.

Note:

Only plug the device into the mains socket after you have connected the external devices.

Inserting batteries in the remote control

1 Open the battery compartment by pressing the snap-catch, and remove the lid.

2 When inserting the batteries (Micro type, e.g. R06 or AA, 2 x1.5 V), observe the polarity marked on the battery compart- ment.

3Close the battery compartment.

Note:

If the DVD player no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries. The manufacturer accepts no liability for damage resulting from used batteries.

Environmental note:

Batteries, including those which contain no heavy metal, may not be disposed of with household waste. Please dispose of

14used batteries in an environmentally sound manner. Find out about the legal regulations which apply in your area.