Grundig GDP 9550 Selecting the sound menu, Selecting the sound mode downmix mode, Audio Settings

Sound
1	Downmix mode	Surround
2	Clock rate	48 kHz
3	Pro Logic	Off
4	Dynamic	On
5	SPDIF output	Original
	Select	Exit
	and choose	Back

AUDIO SETTINGS ________________________________

Selecting the sound menu

1Press »i« to open the main menu.

2Select »Sound« with »S« or »A« and activate with »OK«

– The »Sound« menu appears.

Note:

For further operation, see the following sections, each one star- ting from Step 1.

Downmix mode Surround Stereo

Select

and choose

Clock rate

48kHz

96kHz

Select

and choose

Pro Logic

On

Off

Select

and choose

Selecting the sound mode (downmix mode)

This enables you to select stereo (two-channel sound) or surround sound.

1Select the »Downmix mode« line by pressing »S« or »A« and press »OK« to confirm.

2Select the mode (»Stereo« or »Surround Sound«) by pressing »S« or »A« and press »OK« to confirm.

Setting the sampling rate

This setting is used to adjust the sampling rate of the digital output. The sampling rate indicates how many samples can be read in per time interval.

–Use »96 kHz« for DVDs with a 96 kHz audio signal for optimum analogue audio output at the »AUDIO OUT L R« sockets.

–Use »48 kHz« for DVDs with a 48 kHz audio signal. The signal is emitted at the »AUDIO OUT L R« and »DIGITAL AUDIO OUT« sockets.

1Select the »PCM output« line by pressing »S« or »A« and press »OK« to confirm.

2Select the required value (»48 kHz« or »96 kHz«) by pressing »S« or »A« and press »OK« to confirm.

Selecting Pro Logic sound mode

1Select the »Pro Logic« line by pressing »S« or »A« and press »OK« to confirm.

2Activate the function by pressing »S« or »A« (»On«) and press »OK« to confirm.

38