OPERATION USING EXTERNAL DEVICES------------------------------
Hi-fi system/AV receiver
Connecting the hi-fi system/ AV receiver
1Connect the »Optic Out« socket on the television to the corresponding socket of the device with an optical digital cable (digital audio signal).
Setting the audio format
You can select whether the audio signal output via the »Optic Out« socket should be in the PCM or AC2 format.
1Open the menu with »MENU«.
2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to confirm.
– The »SOUND SETTINGS« menu appears.
3Select »Audio Output Setup« with »V« or »Λ« and press »OK« to confirm.
– The menu appears.
4Select the »Optic Out« with »V« or »Λ«.
5Select the preferred audio format (»PCM« or »Auto«) with »<« or »>«.
Note:
7If you wish to output the audio only via a
6Press »MENU« to end the setting.
Playing the audio signal via the HiFi system
1Connect the »AUDIO OUT L R« sockets on the television to the corresponding socket of the AV receiver with an RCA cable (digital audio signal).
Note:
7If this function is not activated, the audio sig- nal is transmitted to the HiFi system/AV re- ceiver (connected to »AUDIO OUT L R«).
1Open the menu with »MENU«.
2Select the menu item »SOUND SETTINGS« with »V« or »Λ« and press »OK« to confirm.
– The »SOUND SETTINGS« menu appears.
3Select »Audio Output Setup« with »V« or »Λ« and press »OK« to confirm.
– The menu appears.
4Select the line »Audio Out« with »V« or »Λ« and press »<« or »>« to activate the audio output (»Line Out«).
5Select the line » Audio Out Status« with »V« or »Λ« and select the option »Fixed« or »Ad- justable« with »<« or »>«.
Notes:
7If you select »Adjustable«, the volume can be changed in the menu option » Audio Out Volume«.
7If the audio should only be output via the HiFi system/AV receiver, select the option »Off« in the line »TV Speaker with »<« or »>«.
6Press »MENU« to end the setting.
“Dolby” and the
Manufactured under licence from Dolby Laboratories.