Grundig CLE91 OS manual ­72 English

Special settings----------------------------------------------------------------------------------------------------------

Note:

7You can accelerate the search. To do this, you need information about the frequency and network ID. You are usually able to get this data from your cable operator or find it in forums on the Internet. For example, the frequency 402MHz and network ID 61441 can be entered for Germany.

7Start the scan with »« (red).

–All channel and favourites lists will be

deleted­ and compiled anew.

Note:

7After starting the scan, a security query will appear. Press »« (green) to confirm the option »Yes«.

–The »Results« menu appears, and the scan for TV channels begins. Depending on the number of television channels received, this can easily take a few minutes.

–The scan is complete as soon as the »PRO- GRAM TABLE« appears.

Note:

7You can abort the search by pressing »MENU«.

8Press »MENU« to end the setting.

Searching for television channels from the cable provider manu- ally

1Open the menu with »MENU«.

2Select the line »SOURCE SETUP« with »V« or »Λ« and press »OK« to confirm.

– The »SOURCE SETUP« menu appears.

3Select the line »Source« with »V« or »Λ« and press »OK« to confirm.

Select the option »Cable« with »<«, »>«, »V« or »Λ« and press »OK« to confirm.

4Select » Digital Manual Tuning« with »V« or »Λ« and press »OK« to confirm.

– The menu appears.

5Enter the four-digit frequency with »1 ... 0« and press »OK« to confirm.

–The search starts after confirming, the channels found are displayed in the »Re- sults« menu.

6Press »MENU« to finish the setting.

­72 ENGLISH