CyberHome Entertainment CH-RDV 2000 owner manual Component Video Connections

Page 15

Component Video Connections

3 Connecting to a TV with Component Video Inputs

Component Video separates the Video Signal into three separate “components”, resulting in a higher quality picture than S-Video or Standard Composite Video. In order to use Component Video, you must use a TV equipped with Component Video Inputs. You’ll also need (3) Component Video Cables (not included) and a Composite (included) or S-Video Cable used for setup only.

Component Video

Connectors

Y

Cb

Cr

Step 1: Connect the DVD Player using the Composite or S-Video Connection

In order to Switch your DVD Player’s Video Output to Component Video, you must first connect using the Composite or S-Video Connectors. This will allow you to use the player’s Setup Menu to change the Video Output Setting. For details, see page 13. Once you see the player’s splash screen on your TV, proceed to Step 2.

For Help on Using the Setup Menu, see pg 37.

Step 2: Enter the Setup Menu to Change the Video Setting

With disc play stopped, press the SETUP button on the Remote Control to enter the DVD Player’s On-Screen Setup Menu. Use the ARROW keys to navigate down to the VIDEO menu and press ENTER. Use the ARROW keys to proceed down to the OUTPUT setting. Press ENTER. Use the UP/DOWN keys to select YCbCr. Press ENTER to confirm your choice. You will now see the video disappear as the player switches to YCbCr Component Output.

SYSTEM	NTSC
LANG.	4:3 PS
ASPECT	4:3 PS
VIDEO	YCbCr
OUT PUT	YCbCr
AUDIO
CHILD
OTHERS
EXIT
ENTER RETURN SETUP

Step 3: Connect the DVD Player using the Component Video Cables

At this point, turn off the TV and DVD Player and unhook the Composite or S-Video cable used so far. Connect the separate Component Video Cables to the appropriate jacks. Normally, cables and jacks are color-coded to make connection easier. Power on the DVD Player and TV and set your TV to the Video In Channel associated with the Component Video inputs (“Video 3”, “Input 3”, etc.) You should now see the DVD Player splash screen on your TV.

COMPONENT VIDEO IN

TV

Y

Cb

Cr

	DVD
GREEN OR YELLOW	Y
GREEN OR YELLOW
	Cb
BLUE	VIDEO
BLUE	OUT
	Cr
RED	S-VIDEO
	OUT

VIDEOVIDEO

Quick Tips

ŸIf you need to reset the Player’s Video Settings to factory defaults, Reset the player, Open the Disc Tray and press “STOP - 2 - 0 - 0 - 2” on the Remote Control.

15

Image 15

Contents DVD Player w/ CD-RW Important Safety Instructions Class 1 Laser Product Important Safety Instructions Cont’dTable of Contents DVD Player Features & Supported Discs Caring for Optical Discs Important Note about Batteries Preparing and Using the Remote ControlInstalling the Batteries Operation of Remote ControlRemote Control Functions 1 Remote Control Functions 2 DRV DVD / CD-RW Front Panel FunctionsDimming the Front VFD Display DVD Display FunctionsBack Panel Connectors Receiver/Speaker Connections Optional Connecting the DVD Player to your TV / ReceiverDetermining the Video & Audio Connections You Will Use Television Connections One RequiredComposite / S-Video & Stereo Audio Connections Connecting to a TV with S-Video In and Stereo AudioComponent Video Connections Connecting to a TV with Component Video InputsEnter the Setup Menu to Change the Video Setting Connect the DVD Player using the Component Video CablesDolby/DTS 5.1 Channel & Digital Audio Connections Using the Dolby/DTS 5.1 Channel Analog OutputsGetting Started Powering On & Playing a Disc To Stop Disc Play Stopping and Pausing PlayPausing Disc Play Allows you to step through the video in frame-by-frame modeNavigating Disc Menus Next and Previous Track Buttons Skip Forward and Skip BackSlow Motion Scanning Advancing to the Next Track or Skipping Back Through TracksPress Enter to Jump to the Location Jumping to a Specific Chapter/Track or Time PositionSelect the Goto Button Navigating the Goto MenuSaving Locations for Quick Play with Bookmarks Previewing Titles, Chapters or Tracks Before PlaybackRepeating a Specific Time Segment Using the Repeat 1/ALL ButtonUsing the Repeat A-B Button Repeating a Title, Chapter/Track or DiscAdd a Track to the Program List with Enter Playing Tracks in a Particular Order with Program PlayCreate Custom Playback Programs of up to 30 Steps Select the Program Button during PlaybackPlaying MP3 Files with the MP3 Navigator Viewing JPG Files on Your TV Using the Zoom Function More Audio & Video Functions Putting it All Together with the Display Button Press the Display Button while a Disc is PlayingDisplay Menu Options with DVD, VCD and CD Audio Discs Copy and Record Function Buttons Introduction to File Copy and Disc DuplicationQuickly and Easily Perform Disc/File Copy Operations On-Screen Burner InterfaceNavigate to the Open / Close Icon Duplicating a Disc with Disc CopyMake a Copy of a CD-ROM, Audio CD, MP3 or JPG Disc Enter the Burner Interface with the Burner buttonWith an Audio CD inserted Selecting and Copying FilesSelecting and Copying Files Cont’d Select the Files or Tracks to CopyBegin the Copy Operation BURNEREnter the Burner Interface with the Burner button Erasing a CD-RW DiscQuick Erase Full EraseSelecting a Session About Multi-Session DiscsUsing the On-Screen Setup Menu Parental Lock and Other Options Output Composite / S-VIDEO / YCbCr Video Setup OptionsSystem Ntsc / PAL Aspect 43 PS / 43 LB / 169 WSDigital Dolby / DTS / Lpcm Audio Setup OptionsC Standard / Maximum / TV Mode Analog 5.1CH / 2CHLanguage Setup Options Setting Language Options for Setup and DVDsD Deutsch / Español / Italiano / Francais Troubleshooting Common Problems Specifications Glossary of DVD-Related Terms Glossary of DVD-Related Terms cont’d Glossary 44-45 Index