Sharp VC-H680X operation manual Si Mode Selection, Back1 Auto, Repeatl Just, Reci

Page 17

!si Mode Selection

. .A--

You can set the basic functions listed in the table below on the IVIUU~ seieciion scceeii.

PREPARATION

aTurn on your TV and select the video channel and turn on the VCR. (See page 5, item 3.)

CHANNEL PRESET

:olourl

SE1

@Press MENU.

@Select the MODE selection mode with A/v, and then Dress SET .

0 Select the COLOUR mode by pressing d/b, and then press v.

(For details, see Colour Mode on page 20.)

i) v

[Blue

Back1

[Auto

?entall

.Repeatl

[Just

RECI

AUTO ..,... Usually select AUTO mode.

P A L Strict PAL colour mode.

NTSC Strict NTSC colour mode.

Select the NTSC mode with the q/b buttons and press the v button.

NTSC 3.58 When using NTSC 3.58 TV system format. (Input signal: NTSC 3.58)

NTSC 4.43 When using NTSC 4.43 TV system format. (Input signal NTSC 4.43)

PAL TV .., When using PAL TV system format. (Input slgnal: NTSC 4.43)

@Select the BLUE BACK mode by pressing d/b, and then press v.

AUTO Usually select AUTO.

A blue screen will appear when your VCR receives no TV signal or an unrecorded tape is played back.

OFF ,, ,,,,.,.., Select OFF if the screen turns blue due to weak TV signal reception, or playback of a poorly recorded tape.

@Select the AUTO RENTAL mode by pressing A/,, and then press v.

(For details, see Auto Rental Mode on page 21.)

@Select the REPEAT mode by pressing d/b, and then press v.

(For details, see Auto Repeat on page 34.)

@Select the JUST REC mode by pressing d/b, and then press v.

(For details, see Intelligent Timer Recording (JUST REC) on page 32.)

@ Press SET. To return to the normal screen, press MENU.

17

Image 17
Contents Share Before using the VCRContents Location and Handling Imtportant Safeguards and PrecautionsOthers FeaturesAccessories Power on mode LOW Power FeatureDefinitions of Power modes Rear Major Components of Your VCRRrrrntI Inserting the Batteries Remote ControlTV Functions to be Controlled AL Using the Remote Control for TV Operation’Setting the TV Brand Connecting to TV and Audio Equipment Connecting to a Stereo TVIi Connections AntennaBCl Adjusting the Video ChannelIEii OSD On Screen Display How to Display IndicatorsMenu Screen Preparation Setting the LanguageSET Or * 0Initial Setting of Clock Setting the ClockOr* 0 Setting the ChannelsPress Menu Normal+ sEdltn Menu Normal Screen Ore 0Channei skip Cancelling skipEl Channel SkipKancelling Skip Back1 Auto Si Mode SelectionRepeatl Just ReciInserting a Video Cassette F1- PlaybackVideo Search Fast Forwarding and RewindingDuring Play Mode Video Search During Stop Mode Fast Forward and RewindSlow Motion Playback with the Remote Control Shuttle SystemSee Mode Selection on Colour ModeDouble Speed Playback Ntsc Tape Play Back on PAL TVAuto Rental Mode Auto Head Cleaning SystemAuto Tracking Control System Quick Start with Full Loading MechanismAdjusting Hi-Fi Audio Tracking Audio Output ModeFull Auto Playback Playback of Hi-Fi Recorded TapesRecording a TM Programme ProcedureCassette Erase Protection Recording a TV ProgrammeRecording Audio Only Switching Input SignalsRecording Hi-R Stereo Sound Lril NfSC #IV Recording~l~ D I Simple Recording TimerTilliJ1 ,\aA,ullly Illilel Channel A/V CH A./VOn next Programming the Timer with G-COD?SET Setting the Programme Number In Step @PimE Recording with the TimerNormal Normal Screen Confirming Timer ProgrammesIntelligent Timer Recording Just REC Zero-Back Function New Sharp Super PictureDpss Digital Programme Search System PictureNi Instant Replay Auto RepeatSkip Search New Child-Proof Lock New Child-Proof LockDuring Playback During Recording VCR DisplayOn Screen Display Mode OSD on the remote controlTape Remaining Display Fl Editing from a Camcorder to Your VCR El SpecificationsMiscellaneous Problems Before Calling for Service