aL Using the Remote Control for TV Operation’
The provided remote controi can Upeldle t~ie basic iurnciions of your teievision. in addition to most Sharp televisions, other manufacturers’ televisions listed below can also be controlled by setting the remote control to the corresponding TV brand. The remote control’s default brand is “SHARP”, which enables control of most Sharp televisions. When you replace the batteries in the remote control, the control’s TV brand setting will be reset to SHARP.
Setting the TV Brand
0 Turn on your TV.
@From the table below select the button which corresponds with the brand of your TV. Simultaneously press both this button and STANDBY. Hold down for about five seconds.
When setting is complete, the remote control will send a “power off” signal(b) to the TV, and it should turn off.
•If the TV does not turn off In step 0, repeat the step @ setting procedure and select the button for a different brand.
TV BRAND NAME Corresponding button TV BRAND NAME Corresponding button
SHARP | 1 | 1GRAETZ | 7 |
(For example)
TV brand: SHARP (Corresponding button is “1”)
Press these ~ buttons simulta- neously and hold down for about five seconds.
w
TV Functions to be Controlled
Switch to TV control mode.
•Press TV to select the TV control mode.
-
Return to VCR control mode.
•Press VCR to select the VCR control mode.
TV function control
0 Press TV to select the TV control mode.
@Use the following buttons on your remote control to operate your TV set.
TV function *TV POWER (b)
.TV CHANNEL UP/DOWN *TV VOLUME UP/DOWN
•INPUT SELECT button
@Press VCR to return to the VCR control mode.
INoTE>
•When you replace the batteries rn the remote control, if your television is not a Sharp model you must reset the TV brand
•If MENU, PLAY, STOP, FF or REW are pressed in the TV control mode, the remote control will return to VCR control mode.
IMPORTANT NOTE:
Although the provided remote control unit is compatible with most SHARP televisions, as well as many TV models manufactured by others, it is possible that the provrded remote control will not work with your TV, or will control only some of the functions.
If the button listed in the table does not work with your TV set, you may want to try another; occasionally, models vary within a brand.
Consequently, Sharp’s warranty does not cover all of the models under the brands listed in the table.