|
|
|
|
| Recording with ttie Timer |
|
|
|
|
| I |
|
|
|
|
|
|
| Etartl r | When the clock IS set | @ Set the start time with the numeric buttons or A/v and | ||
| to 24H mode, “AM/ | ||||
| PM,5WIII fl0t aolsear | press F. | |||
WOPI | @ Set the stop time with the numeric buttons or A/Y and | |
|
| press b. |
[Tape Speed] | A | @ Select the tape speed with A or V. (See Intelligent |
ATE PR START STOP
Timer Recording (JUST REC) on page 32.)
1i
5,12 47 12:00PH12:30PH~ INoTE>
•LP: Long Play
•EP, Extended Play (only NTSC Tape)
[Timer review]
@ Press SET. To programme additional timer settings, repeat steps @ through 0.
SET
| MENU |
| Normal |
| @ To return to the normal screen, press MENU. |
| 0 | I) |
| ||
| Screen |
|
| ||
|
|
|
| ||
|
|
|
|
| (D To set the VCR for automatic timer recording, press |
TIMER |
|
|
|
| TIMER ON/OFF and ensure the “a”indicator lights on |
ON/OFF |
|
|
|
| the VCR display. |
0 | ’ |
|
|
| |
|
|
|
|
•If the video cassette runs out before recording all the programmes, your VCR will stop, eject the cassette, and shut off automatically.
•If power is interrupted for more than 60 minutes (power failure, etc.), all timer settings will be cancelled.
•If TIMER ON/OFF is pressed when there is no cassette loaded, “I9flashes for 5 seconds, indicating that timer recording is not possible.
•If TIMER ON/OFF is pressed while a cassette with an uncovered erasure protection hole is loaded, “0”flashes and the cassette is ejected.
•When “B”is lit, regular VCR operation, clock setting and settrngicancelllngiconfirming timer positions are not possible. For regular VCR operation, clock setting and setting/cancelling/confirming timer positions, press TIMER ON/OFF to disengage the timer (“B”disappears), and then turn on your VCR.
•During timer recording, the timer cannot be set.
•To terminate timer recording, press STOP during timer recording.
•If the same time is input for the start time and the stop time, the timer setting will be cancelled.
3 0