Sharp VC-H680X operation manual Auto Repeat, Skip Search, Ni Instant Replay

m Auto Repeat

With this feature, the entire tape is played back repeatedly.
0 Set the REPEAT mode on the MODE-selection screen to ON.	COLOUR		m PAL NTSC
When the video cassette reaches its end, the VCR will stop	NTSC	3.58		4.43 m
playback, rewind the tape, and automatically play it back again.	BLUE BACK			m OFF
	AUTO RENTAL			m OFF
	~REPEAT
• The ON/OFF status of the Auto Repeat can be checked on the MODE Selection	JUST	REC

screen (See Mode Selection on oaae 17.) (And when the Auto Reoeat is ON. “REPEAT” will be displayed onthe’O%)

• If the Auto Repeat is on and the tape is rewound to the beginning with rewind crr reverse video search, the tape will automatically start playback.

m Skip Search

When SKIP SEARCH on the remote control is pressed during playback mode, the VCR will perform a forward video search for a fixed interval of playback time before resuming playback. Depending on how many times the button is pressed, it is possible to set the forward video search time to approx. 30, 60, 90 or 120 seconds of recorded material.

Number of Times Pressed		Forward Video Search Time	1	(On the VCR display)	I
1 time	I	Approx. 30 sec.	I
		(of playback time)
2 times		Approx. 60 sec.
		(of playback time)	I
3 times		Approx. 90 sec.
		(of playback time)
4 times		Approx. 120 sec.
		(of playback time)

During skip search, the interval of the video search will flash on the display.

ni Instant Replay

When 4 on the remote control is pressed during playback, the VCR will perform a reverse video search for a fixed interval of playback time before resuming playback. Depending on how many times the button is pressed, it is possible to set the reverse video search time to approx. 20, 40, 60, or 80 seconds of

5, recorded material.

34