Sharp LC-65RX1X Labelling input sources, Skipping HDMI/RGB input, Colour system settings

Settings when using external devices

Labelling input sources

You can assign each input source a label as you prefer.

1Press TV/VIDEO to select the desired input source.

2Press MENU and the MENU screen displays.

3Press c/d to select “Setup”.

4Press a/b to select “Input Label”, and then press ENTER.

5Press a/b/c/d to select each character of the new name for the input source, and press

ENTER.

			DVD
A B C D E					F	G	H	I	J CLEAR
K	L	M N O			P	Q	R	S	T BACK
U	V W		X	Y	Z	+	– .		_
0	1	2	3	4	5	6	7	8	9	END

(Example)

•When you want to change the input label that you

have already assigned to the default name, press c/d to move to “CLEAR” on the “Input Label” screen, and then press ENTER.

6Repeat until the name is fully spelt out.

•The name can be 6 characters or less.

•When you want to set an input source name of less than 6 characters, select “END”, then press ENTER to exit from the labelling menu.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

DVD

INPUT7

(Example)

NOTE

•You cannot change labels if the input source is TV.

•The display for INPUT SOURCE selecting is only displayed when you toggle the input by using TV/VIDEO on the remote control.

Skipping HDMI/RGB input

This setting allows you to skip the HDMI or PC input on the input source Selection operation.

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

3Press a/b to select “Input Skip”, and then press ENTER.

4Press a/b to select the Input (INPUT4 to INPUT7) you wish to skip, and then press

ENTER.

INPUT 4 (HDMI)

INPUT 5 (HDMI)

INPUT 6 (HDMI)

INPUT 7 (RGB)

Yes No

5Press c/d to select “Yes”, and then press

ENTER.

6Press MENU to exit.

Colour system settings

You can change the colour system to one that is compatible with the image on the screen.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

3Press a/b to select “Colour System”, and then press ENTER.

4Press a/b to select a compatible video signal system of your equipment, and then press

ENTER.

Auto

PAL

SECAM

NTSC 3.58

NTSC 4.43

PAL-60

NOTE

•Factory preset value is “Auto”.

•If “Auto” is selected, colour system for input signal is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, NTSC 4.43).

•“Colour System” is selectable only when inputting an S-VIDEO or composite signal.

50