Sharp LC-65RX1X operation manual Mounting the TV on the wall, Removing the stand

Page 72

Appendix

Mounting the TV on the wall

Removing the stand

For wall mounting with the optional bracket (AN-65AG1), remove the stand.

Before detaching/attaching the stand

Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.

Remove all terminal covers and connected cables.

Lay the TV down on cushioning (such as a blanket) over a table.

Make sure two or more people perform the operation.

CAUTION

Do not remove the stand from the TV unless using an optional bracket to mount it.

1

2

1 Unfasten the four screws used to secure the stand in place.

2 Attach the wall mount brackets.

1 Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.)

2 Make sure to detach the TV with it tilted slightly backwards and supporting the knobs on the rear of the TV while holding the stand.

3 Don’t push hard on the speaker cover portion of the TV.

3

Set the TV on the wall.

As the TV is very heavy, be careful not to drop it on a hard fl oor or on your foot.

NOTE

• To attach the stand, perform the above steps in reverse order.

70

Image 72
Contents LC-65RX1X Page Contents Dear Sharp customerContents Information on the software license for this product Important Safety Precautions Precautions when transporting the TVSupplied accessories Remote control unit AAA size battery g2Trademarks Cable clamp g2Preparation Part namesTV Front/Side Regarding the headphone jackPreparation TV Rear Terminals Input 7 PC terminals Input 5 Hdmi terminalPreparation Remote control unit FreezeBefore turning on the power Connecting the antenna cableConnecting the AC cord Be sure to use a power outlet AC 110-240 V, 50/60 HzSupplying electric power to the antenna DescriptionOff Initial auto installation Checking signal strength and channel strengthConfirm the following before turning on the power Checking signal strengthConnecting external devices Connecting a VCR, game console or camcorderWhen using component cable commercially available Connecting a DVD playerPreparation Connecting a STB Satellite, Cable, etc Connecting a PCUsing Digital Audio Output Be sure to use at least two people when moving the TV Protecting against overturningAnchoring the TV to the wall or a pillar Fixing the TV to the tableUsing the remote control unit Inserting the batteriesTurning on the power Turning off the powerPress Power on the remote control Power indicatorWhat is Menu? About Menu operationsBasic Menu operations About the Guide DisplayPreparation TV/AV input mode menu items List of menu items to help you with operationsPreparation PC input mode menu items Input SkipSetting channels automatically If you have already set the password, enter it hereSee page 28 for setting a password Watching TVSelecting programmes Adjusting the volume Menu language settingsSetting channels to your preference Digital settingsWManual Adjust WAdditional SearchWatching TV Manual setting for each channel Analogue Fine tuningSearch tuning Colour systemWatching TV Manual setting for each channel Watching TV Sorting programmes Erasing programmesSort menus Message screen pops upUseful viewing functions Returning to the previously selected channel FlashbackFreezing the image Muting the audio temporarilyWatching TV Switching the analogue audio format Switching the digital audio formatSetting a password Clearing the passwordEnter the same 4-digit number as in to confirm Watching TV Parental Rate Programme Title DisplayGeneral Children underEnergy conservation settings Picture size settings WSS signal 43 screen Mode PanoramaPress c/d to select On or Off, and then press Enter Mode menu Watching TV Selecting the picture size manuallyManual Selection Auto SelectionSelecting a preset AV Mode Using AV Mode on the remote control unitPress AV Mode Manual picture settings Picture adjustmentOPC Optical Picture Control setting Watching TV Advanced picture settings Colour Temp. Colour temperatureFilm Mode Active ContrastOther picture settings Adjusting the image positionDNR Digital Noise Reduction Game Play TimeWatching TV Indicating time on the screen Time Display Time FormatDisplay the clock time Audio adjustment Output Volume SelectSurround Bass EnhancerWatching TV Automatic Volume Adjustment Clear VoiceDigital Audio Output Dolby DigitalWatching TV Programme Guide Press Guide to display the programme guide listTo the next page or return to the previous Favourite channel setting Using Favourite CH on the remote control unitDeleting a favourite channel When you watch the TV for the first time ATV Analogue/DTV/RADIO buttonsATV Analogue TV DTV Digital TVEPG display settings Display Range SetupGenre Icon Setup EPG Setup setting for receiving EPG dataSelecting a programme using EPG Basic Operation Display the EPG screenSelecting a programme 3Check programme information Watching TV 4Search a programme in a category 5Search for a programme by date/timeTimer recording using EPG Cancelling the timer recordingSelecting Watch in the timer setup screen Selecting Record in the timer setup screenSettings when using external devices Settings when using Hdmi output devicesConnecting an Hdmi output device Hdmi High-Definition Multimedia Interface Auto ViewSettings when using external devices Hdmi Audio SelectSelecting the input source and signal type Selecting input signal typeUsing TV/VIDEO on the remote control unit or on the TV Selecting input sourceColour system settings Factory preset value is AutoLabelling input sources Skipping HDMI/RGB inputControlling Hdmi devices using Aquos Link What you can do with Aquos LinkAquos Link Setup Aquos Link Auto power onPress a/b to select Auto Power On, and then press Enter Aquos Link connectionUsing Genre Info Operating an Aquos Link deviceSelecting recorder Listening with the Aquos LINK- compatible audio systemPlayback of titles using Aquos Link Sound mode changes every time you press EnterListening with the Aquos TV speaker system Selecting media type for CEC-compatible recorder One Touch RecordingHdmi device selection Select the programme to recordConnecting a PC Signal names for 15-pin mini D-sub connectorHdmi Connection Analogue ConnectionDisplaying a PC image on the screen Selecting the picture sizeYou can select the picture size as illustrated below Press Wide or a/b to select a desired item on the menuConnecting a PC Adjusting the PC image automatically PhaseClock Input resolution settings Selecting the input resolutionCommunication procedure PC Control of the TVCommunication conditions ? ? ?PC compatibility chart RS-232C commands listCommands Teletext function About TeletextTeletext language setting Displaying SubpagesTime display Teletext functionSwitching subtitle languages DVB Subtitle DVB SubtitleDisplaying Subtitles Troubleshooting Troubleshooting-Digital broadcastingError message about reception of broadcast AppendixError messages about recording using Aquos Link AppendixReset InformationIdentification Message ListOptional accessory SpecificationsModel Part name Model numberDimensional drawings When using wall mount bracket AN-65AG1Mounting the TV on the wall Removing the standBefore detaching/attaching the stand Appendix Handling and precautions with the wall-mounted TV Using an optional bracket to mount the TVAbout setting the TV angle Hanging on the wallAdjusting angles of AN-65AG1 are 0, 5 Wall markings Tape Dimensional markingsAppendix Wall mounting Remove the tape and the string from the wallClearing the Password Password isInformation on the software license for this product Software compositionSoftware developed by Sharp and open source software Obtaining source codeMemo Memo