Sharp LC-65RX1X Operating an Aquos Link device, Selecting recorder, Using Genre Info

Page 55

AQUOS LINK

Selecting recorder

You can select a recorder for the recording from several connected recorders.

1Repeat steps 1 to 3 in AQUOS LINK Auto power on.

2Press a/b to select “Selecting Recorder”, and then press ENTER.

Auto Power On

 

 

 

 

 

 

 

 

 

Selecting Recorder

 

 

 

 

Using Genre Info.

 

Input

Location

 

 

 

 

 

 

 

INPUT4

[1. 0. 0. 0]

 

 

 

 

 

 

 

 

INPUT5

[2. 0. 0. 0]

 

 

 

 

 

 

3Select the recorder, and then press ENTER.

Operating an AQUOS LINK device

AQUOS LINK allows you to operate the HDMI- connected device with one remote control.

Use the following procedure to start playback.

1Press PLAY I to start playback of a title.

See page 54, section “Playback of titles using AQUOS LINK” if you want to start playback using the list of the titles of the AQUOS BD Player.

2Press FWD J to fast forward. Press REV G to reverse.

Press STOP H to stop.

Press POWER to turn the HDMI-connected device on/off.

Use the following procedure to start recording.

Check the following items before recording.

Make sure the antenna cable is connected properly.

Check if the recording media (HDD, DVD, etc.) has enough capacity for recording a programme.

Select the equipment for recording in Selecting Recorder.

4Press MENU to exit.

NOTE

If you have connected the AQUOS LINK-compatible audio system between the TV and an CEC-compatible recorder, the input source’s indication changes from “INPUT4” to “INPUT4 (Sub)” as it is shown below.

Auto Power On

Selecting Recorder

Using Genre Info.

Input

Location

 

 

 

 

INPUT4

[1. 0. 0. 0]

 

 

 

 

 

 

 

INPUT4 (Sub)

[1. 1. 0. 0]

 

 

 

 

 

 

 

INPUT5

[2. 0. 0. 0]

 

 

 

Using Genre Info.

This function allows you to automatically switch to the appropriate sound mode depending on the genre information included in the digital broadcast.

1Repeat steps 1 to 3 in AQUOS LINK Auto power on.

2Press a/b to select “Using Genre Info.”, and then press ENTER.

3Press c/d to select “On”, and then press

ENTER.

1After you selected recording media (HDD, DVD, etc.) in the menu, please make sure the recording menu in the ready condition.

2Press REC E to record a programme.

3Press REC STOP H to stop recording.

Listening with the AQUOS LINK- compatible audio system

You can opt to listen to the TV sound only from the AQUOS LINK-compatible audio system.

1Open the remote control unit’s fl ip cover, press OPTION and the AQUOS LINK menu screen displays.

2Press a/b to select “By AQUOS AUDIO SP”, and then press ENTER.

AQUOS LINK Menu

Recorder EPG

Top Menu/Title List

Media change

By AQUOS AUDIO SP

By AQUOS SP

Sound mode change

Setup Menu

Model select

The sound from the TV speaker and headphone terminal is silenced and only the sound from the AQUOS LINK-compatible audio system is audible.

You can use VOL k/l and MUTE (e).

53

Image 55
Contents LC-65RX1X Page Dear Sharp customer ContentsContents Information on the software license for this product Precautions when transporting the TV Important Safety PrecautionsCable clamp g2 Supplied accessoriesRemote control unit AAA size battery g2 TrademarksRegarding the headphone jack PreparationPart names TV Front/SideTerminals Input 7 PC terminals Input 5 Hdmi terminal Preparation TV RearFreeze Preparation Remote control unitBe sure to use a power outlet AC 110-240 V, 50/60 Hz Before turning on the powerConnecting the antenna cable Connecting the AC cordDescription Supplying electric power to the antennaOff Checking signal strength Initial auto installationChecking signal strength and channel strength Confirm the following before turning on the powerConnecting a DVD player Connecting external devicesConnecting a VCR, game console or camcorder When using component cable commercially availableConnecting a PC Preparation Connecting a STB Satellite, Cable, etcUsing Digital Audio Output Fixing the TV to the table Be sure to use at least two people when moving the TVProtecting against overturning Anchoring the TV to the wall or a pillarInserting the batteries Using the remote control unitPower indicator Turning on the powerTurning off the power Press Power on the remote controlAbout the Guide Display What is Menu?About Menu operations Basic Menu operationsList of menu items to help you with operations Preparation TV/AV input mode menu itemsInput Skip Preparation PC input mode menu itemsWatching TV Setting channels automaticallyIf you have already set the password, enter it here See page 28 for setting a passwordMenu language settings Selecting programmes Adjusting the volumeWAdditional Search Setting channels to your preferenceDigital settings WManual AdjustColour system Watching TV Manual setting for each channel AnalogueFine tuning Search tuningWatching TV Manual setting for each channel Message screen pops up Watching TV Sorting programmesErasing programmes Sort menusMuting the audio temporarily Useful viewing functionsReturning to the previously selected channel Flashback Freezing the imageSwitching the digital audio format Watching TV Switching the analogue audio formatClearing the password Setting a passwordEnter the same 4-digit number as in to confirm Children under Watching TV Parental RateProgramme Title Display GeneralEnergy conservation settings WSS signal 43 screen Mode Panorama Picture size settingsPress c/d to select On or Off, and then press Enter Auto Selection Mode menuWatching TV Selecting the picture size manually Manual SelectionUsing AV Mode on the remote control unit Selecting a preset AV ModePress AV Mode Picture adjustment Manual picture settingsOPC Optical Picture Control setting Active Contrast Watching TV Advanced picture settingsColour Temp. Colour temperature Film ModeGame Play Time Other picture settingsAdjusting the image position DNR Digital Noise ReductionTime Format Watching TV Indicating time on the screen Time DisplayDisplay the clock time Bass Enhancer Audio adjustmentOutput Volume Select SurroundDolby Digital Watching TV Automatic Volume AdjustmentClear Voice Digital Audio OutputPress Guide to display the programme guide list Watching TV Programme GuideTo the next page or return to the previous Using Favourite CH on the remote control unit Favourite channel settingDeleting a favourite channel DTV Digital TV When you watch the TV for the first timeATV Analogue/DTV/RADIO buttons ATV Analogue TVEPG Setup setting for receiving EPG data EPG display settingsDisplay Range Setup Genre Icon SetupBasic Operation Display the EPG screen Selecting a programme using EPGSelecting a programme 3Check programme information 5Search for a programme by date/time Watching TV 4Search a programme in a categorySelecting Record in the timer setup screen Timer recording using EPGCancelling the timer recording Selecting Watch in the timer setup screenHdmi High-Definition Multimedia Interface Auto View Settings when using external devicesSettings when using Hdmi output devices Connecting an Hdmi output deviceHdmi Audio Select Settings when using external devicesSelecting input source Selecting the input source and signal typeSelecting input signal type Using TV/VIDEO on the remote control unit or on the TVSkipping HDMI/RGB input Colour system settingsFactory preset value is Auto Labelling input sourcesWhat you can do with Aquos Link Controlling Hdmi devices using Aquos LinkAquos Link connection Aquos Link SetupAquos Link Auto power on Press a/b to select Auto Power On, and then press EnterListening with the Aquos LINK- compatible audio system Using Genre InfoOperating an Aquos Link device Selecting recorderSound mode changes every time you press Enter Playback of titles using Aquos LinkListening with the Aquos TV speaker system Select the programme to record Selecting media type for CEC-compatible recorderOne Touch Recording Hdmi device selectionAnalogue Connection Connecting a PCSignal names for 15-pin mini D-sub connector Hdmi ConnectionPress Wide or a/b to select a desired item on the menu Displaying a PC image on the screenSelecting the picture size You can select the picture size as illustrated belowPhase Connecting a PC Adjusting the PC image automaticallyClock Selecting the input resolution Input resolution settings? ? ? Communication procedurePC Control of the TV Communication conditionsRS-232C commands list PC compatibility chartCommands About Teletext Teletext functionTeletext function Teletext language settingDisplaying Subpages Time displayDVB Subtitle Switching subtitle languages DVB SubtitleDisplaying Subtitles Appendix TroubleshootingTroubleshooting-Digital broadcasting Error message about reception of broadcastAppendix Error messages about recording using Aquos LinkMessage List ResetInformation IdentificationPart name Model number Optional accessorySpecifications ModelWhen using wall mount bracket AN-65AG1 Dimensional drawingsRemoving the stand Mounting the TV on the wallBefore detaching/attaching the stand Hanging on the wall Appendix Handling and precautions with the wall-mounted TVUsing an optional bracket to mount the TV About setting the TV angleRemove the tape and the string from the wall Adjusting angles of AN-65AG1 are 0, 5Wall markings Tape Dimensional markings Appendix Wall mountingPassword is Clearing the PasswordObtaining source code Information on the software license for this productSoftware composition Software developed by Sharp and open source softwareMemo Memo