Sharp LC-42SH330E, LC-26SH330E, LC-32SH330E Environmental specifications, Other information

Page 30

Appendix

Environmental specifications

 

Item

 

26”

32”

42”

 

 

 

 

 

*1 On-Mode (W)

Standard

75 W

90 W

160 W

 

 

 

 

 

 

*2

Energy-Save-Mode (W)

Eco ≥ On

45 W

50 W

90 W

 

 

 

 

 

*3 Standby-Mode (W)

 

0.3 W

0.3 W

0.3 W

 

 

 

 

 

 

*4

Off Mode (W)

Power button

0.29 W

0.29 W

0.29 W

 

 

 

 

 

 

*5

Annual Energy

 

109.5 kWh

131.4 kWh

233.6 kWh

 

Consumption (kWh)

 

 

 

 

 

 

*6

Annual Energy

 

 

 

 

 

Consumption (kWh)

Eco ≥ On

65.7 kWh

73 kWh

131.4 kWh

 

(Energy-Save-Mode)

 

 

 

 

 

 

 

 

 

 

*1 Measured according to IEC 62087 Ed. 2

*2 For further information about the Energy Save function, please see related pages in this operation manual *3 Measured according to IEC 62301 Ed. 1

*4 Measured according to IEC 62301 Ed. 1

*5 Annual energy consumption is calculated on the basis of the On-Mode (Standard) power consumption, watching TV 4 hours a day, 365 days a year

*6 Annual energy consumption is calculated on the basis of the Energy-Save-Mode power consumption, watching TV 4 hours a day, 365 days a year.

NOTE

The power consumption of On-Mode varies depending on the images the TV displays.

Other information

Cautions regarding use in high and low temperature environments

When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: + 5°C to e35°C.

Devices connected to the protective earthing of the building installation through the MAINS connection or through other devices with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system therefore has to be provided through a device providing electrical isolation within a certain frequency range (galvanic isolator, see EN 60728-11).

NOTE

For requirements in Norway and Sweden, the requirements for isolation are also relevant for devices that can be connected to television distribution systems.

29

Image 30
Contents LC-26SH330E / LC-32SH330E LC-42SH330EContents Introduction Important Safety PrecautionsPrecautions when transporting the TV Dear Sharp customerRemote control unit TV Front view RS232C-connectorRS232 connector is only used for service purpose TV Rear viewMount the TV base Supplied accessoriesPreparation Wall mountingSelect an item by the remote control Installation of batteriesUsing the remote control Display the Menu ScreenQuick guide Initial installation overviewPower on and run the auto installation PreparationTuner mode setting Watch TVStandby mode TV indicator statusWatching TV Switch on EPG EPG Electronic Programme GuidePress EPG or Exit to exit Buttons for teletext operations Using the MHEG5 application UK onlyTeletext Select a Teletext languageTV menu PictureSound EEUpdate Scan Use Sound ModeAutomatically install channels Select a digital audio languageEESingle RF Scan Menu EEAnalogue Manual ScanEEFavourite Network Select EEChannel Edit EEChannel SkipEEChannel Sort Channel sort allows you to reorder the channelsFeatures Normal Not for HDZoom 1 Not for HD Zoom 2 Not for HDWide EESet analogue subtitles EEAutomatically switch the TV to standby Sleep timerUse subtitles EESelect a subtitle language on digital TV channelsDivX Setup EEDivX Registration VOD No Signal OffReset Default Hdmi overscanParental Repeat to 4 to change password Set / Change passwordClear all parental settings Reset all the settings in the Parental menuEEView Photos Connecting a USB deviceUSB function EEBasic OperationUSB device compatibility EEListen to MusicEEPlay Videos YPbPr Component connection Connecting external devicesHdmi connection Scart connectionSpeaker / Amplifier connection Inserting the Smartcard into the CA moduleChecking CA module information Connecting a PC Video formatsAnalogue connection Appendix TroubleshootingProblem Possible Solution Hair dryersSpecification STEREO/BILINGUAL NICAM/A2Environmental specifications Other informationTrademarks Software developed by Sharp and open source softwareAcknowledgements Other Countries outside the EU Information on Disposal for Business Users European UnionPage Special Note for Users in the U.K Blue Neutral Brown Live