Useful features, Using the analogue programme list

Useful features

WIDE MODE	TV/DTV/AV only

You can select the picture size. Selectable picture size varies with the type of signal received.

Item (for SD (Standard-Definition) signal)

Normal: For 4:3 “standard” pictures. A side bar appears on each side.

Zoom 14:9: For 14:9 letterbox pictures. A thin side bar appears on each side, and you may see bars on the top and bottom with some programmes.

Panorama: In this mode the picture is progressively stretched toward each side of the screen.

Full: For 16:9 squeeze pictures.

Cinema 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

Cinema 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

Item (for HD (High-Definition) signal)

Full: Display with the Overscan image. Crop all sides of screen.

	WIDE MODE	PC only
You can select the picture size.
1	Press f.
	• The WIDE MODE menu displays.
2	Press for a/b to select a desired item on the
	menu.

NOTE

•Can also be adjustable when the HDMI-PC input (see page 1) is selected.

•Connect the PC before making adjustments. (See page 9.)

•Selectable picture size may vary with input signal type.

Item

Normal: Keeps the original aspect ratio by filling the screen up to the top and bottom.

Full: An image fully fills the screen.

Dot by Dot: Detects the resolution of the signal and displays an image with the same number of pixels on the screen.

●Manual Selection

1 Press f.

•The WIDE MODE menu displays.

•The menu lists the wide mode options selectable for the type of video signal currently received.

2 Press f or a/b while the WIDE MODE menu displays on the screen.

•As you toggle down the options, each is immediately reflected on the screen. No need to press OK.

●Auto Selection

If you set WSS and 4:3 Mode in the Setup menu on page 15, the optimum WIDE MODE is automatically chosen for every broadcast, VCR or DVD containing the WSS information.

●WSS menu

To enable Auto Selection, set WSS in the Setup menu to “On”. (See page 15.)

●4:3 Mode menu

To set the type of the wide screen, select “Normal” or “Panorama” in the 4:3 Mode menu. (See page 15.)

4:3 Mode set to “Normal”

4:3 Mode set to “Panorama”

NOTE

•If the signal contains no WSS information, Auto Selection will not function even when the WSS option is enabled.

Using the analogue programme list

You can also select the desired channel from programme list instead of using 0–9numeric buttons or P (r/s).

1 Press OK when no other menu screen is displayed. (Except when an external input source is selected.)

2 Press a/b to select the desired channel to tune in, and then press OK.

Freezing the image while watching

Allows you to capture and freeze one frame from a moving image that you are watching.

1 Press Z.

• Captures one frame from a moving image.

2 Press Zagain (or press RETURN) to cancel the function.

NOTE

• The still image automatically goes out after 30 minutes.