Sharp LC-19D1E Menu operations, Connecting a PC, Common operations, Using external equipment

Using external equipment

Connecting a PC

Use the EXT 5 terminals to connect a PC.

EXT 5	PC
ø 3.5 mm stereo minijack cable*

RGB cable*

NOTE

EXT 5	PC
ø 3.5 mm stereo minijack cable*

RGB/DVI conversion cable*

•The PC input terminals are DDC1/2B-compatible.

•Refer to page 27 for a list of PC signals compatible with the TV.

Menu operations

Common operations

The following are three examples of basic menu operations. Please operate the menu by using the following three patterns as a reference.

NOTE

•Select “Reset” under each MENU and for each Mode to reset all adjustment items to the factory preset values.

•Press MENU or END to exit Menu. Press RETURN to return to the previous display.

●Menu Operation: A

1Press MENU and the MENU screen displays.

2Press c/d to select the desired menu.

3Press a/b to select the desired menu item, and then press OK (Example: OPC, etc).

Picture

DYNAMIC
OPC	[Off]
Backlight	[+16]		–	+
Contrast	[	32]
Brightness	[	0]	–	+
Colour	[	+4]	–	+
Tint	[	0]
Sharpness	[ +4]		–	+
Advanced
Reset

4Press a/b(c/d) to select the desired item, press OK if necessary (Example: OPC setting).

On(Display)

On

Off

●Menu Operation: B

1Repeat steps 1 and 2 in Menu Operation: A.

2Press a/b to select the desired menu item (Example: Backlight, Contrast, etc).

3Press c/d to adjust the item to your desired position.

Backlight	[+16]		–	+
Contrast	[	32]
Brightness	[	0]	–	+
Colour	[	+4]	–	+
Tint	[	0]
Sharpness	[	+4]	–	+

●Menu Operation: C

1Repeat steps 1 and 2 in Menu Operation: A.

2Press a/b to select the desired menu item, and then press OK (Example: Advanced, etc).

3Press a/b to select the desired menu item, and then press OK (Example: Colour Temp., Film Mode, etc).

C. M. S.-Hue
C. M. S.-Saturation
C. M. S.-Value	High
Colour Temp.	Mid-High
Film Mode	Middle
3D - Y/C
Monochrome	Mid-Low
I/P Setting	Low

4Press a/b(c/d) to select or adjust the desired item, press OK if necessary.

9