Sharp LC-19D1S, LC-19D1E DTV menu operations, Teletext function, DTV common operations

Useful features

Teletext function

What is Teletext?

Teletext broadcasts pages of information and entertainment to specially equipped television sets. News, weather and sports information, stock exchange prices and programme previews are among the many services available.

Turning on and off Teletext

1 Select a TV channel or external input source providing the Teletext programme.

2 Press m to display the Teletext.

3 Each time you press m, the screen switches as shown below.

DATA*TELETEXT

TELETEXT

Button functions

Buttons	Description
P (r/s)	Increase or decrease the page number.
Colour (Red/	Select a group or block of pages displayed in the
Green/Yellow/	coloured brackets at the bottom of the screen by
Blue)	pressing the corresponding Colour (Red/Green/
	Yellow/Blue) on the remote control unit.
0–9	Directly select any page from 100 to 899 by
	using 0–9.
v (Top/	Switch the Teletext image to Top, Bottom or
Bottom/Full)	Full.
k (Reveal	Reveal or hide hidden information such as
hidden Teletext)	an answer to a quiz.
3 (Hold)	Stop updating Teletext pages automatically
	or release the hold mode.
[ (Subtitle	Display the subtitle or exit the subtitle screen.
for Teletext)	• Subtitle will not be displayed when the service
	does not contain the subtitle information.
1 (Subpage)	Reveal or hide subpages.
	• Red button: Move to the previous subpage.
	• Green button: Move to the following subpage.
	• These two buttons are shown on the screen
	by the signs l and k.

* May appear in DTV input mode.

•If you select a programme with no Teletext signal, “No Teletext available.” displays.

•The same message displays during other modes if no Teletext signal is available.

NOTE

•Teletext will not work if the selected signal type is RGB. (See page 16.)

DTV menu operations

								1	Language
DTV common operations
									• To customise the language preference for audio and
DTV menu screen									MHEG5 application.
							2		Programme Setup
									• To configure various settings for each service.
									Installation
						3
1	2	3	4	5	6				• To scan all services available in your area, or to label/
									erase/re-scan the selected carrier.

EDTV common menu operation

1 Press DTV or b to access the DTV mode.

2 Press DTV MENU and the DTV Menu screen displays.

3 Press c/d to select the desired menu, and then press OK if necessary.

•From this point, menu operations differ depending on the item you are going to adjust. See the respective section of the menu operation.

•You cannot select any DTV-related menu items unless “Auto Installation” has been completed.

•Press RADIO to switch between DTV and Radio mode.

•To exit the current screen without saving the change, press END.

4System Setup

•To configure On-Screen Display and Child Lock settings.

5Accessories

•To display the current version of the software or to allow the software upgrade to take place.

6Common Interface

• To display the current Common Interface details.

18