Menu operations
●Auto Search
You can automatically search for and download TV channels by performing the procedure below. This is the same function as from programme auto search to auto sorting in Auto Installation.
1 Repeat steps 1 to 4 in Programme Setup.
2 Press a/b to select “Yes”, and then press OK.
●Manual Adjust
You can set some channel items manually.
Colour sys.
Select the optimum colour systems to receive. (AUTO, PAL, SECAM)
NOTE
•If “Auto” is selected, colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. PAL, SECAM).
Sound sys. (Broadcasting system)
Select the optimum sound systems (Broadcasting systems) to receive. (B/G, D/K, I, L, L’)
Fine
Colour Sys.
Sound Sys.
Label
Skip
Decoder
Lock
179.25
MHz
Label
When a TV channel sends its Network Name, the Auto Installation detects the information and assigns a name to it. However, you can change individual channel names.
1 Repeat steps 1 to 7 in Manual Adjust.
2 Press a/bto select characters and c/dto move to the desired digit.
1
2
3 Press a/b to select “Programme Setup”, and then press OK.
If you have already set the PIN under “Child Lock”, enter it here.
• See page 14 for setting PIN.
4 Press a/b to select “Manual Adjust” and then press OK.
5 Press a/b to select “Yes”, and then press OK.
6 Press a/b/c/d to select the channel you want to edit, and then press OK.
• The selected channel information displays.
7 Press a/b to select the desired menu item, and then press OK.
8 Press a/b
Fine
You can adjust the frequency to your desired position.
NOTE
•Adjust while checking the background picture as a reference.
•Instead of pressing c/d to adjust the frequency in step 8 above, you can set by directly entering the frequency number of the channel with
EXAMPLE
•179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
•49.25 MHz: Press 0 s 4 s 9 s 2 s 5.
3 Repeat step 2 above until the name is fully spelt out, and then press OK to complete the label setting.
Skip
Channels with “Skip” set to “On” are passed over when using Pr/Ps even if selected while watching the image from the TV.
Decoder
When connecting a decoder to the unit, you need to select EXT 1.
Lock
You can block the viewing of any channel.
NOTE
•See page 14 for setting PIN.
•When Lock is set to “On” for a channel, “Child lock has been activated.” displays, and the image and sound of the channel are blocked.
•When pressing OK while “Child lock has been activated.” displays, PIN input menu will display. Inputting the correct PIN lifts the child lock temporarily until the power is turned off.
13