Controlling the Projector by a Computer
Connecting to a Computer Using a DIN- D-sub RS-232C Adaptor and an RS-232C Serial Control Cable
When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS-232C adaptor and an RS-232C serial con- trol cable (cross type, sold separately), the computer can be used to control the projec- tor and check the status of the projector. See page 89 for details.
1Connect the supplied DIN-D- sub RS-232C adaptor to an RS- 232C serial control cable (sold separately).
2Use the above cables to con- nect the projector and the com- puter.
Note
•Do not connect or disconnect an RS-232C serial control cable to or from the com- puter while it is on. This may damage your computer.
•The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details.
•See page 88 for connection of an RS- 232C serial control cable.
Supplied | DIN-D-sub |
accessory | RS-232C adaptor |
Optional | RS-232C serial control cable |
cable | Type: AN-C10RS (32'10" (10.0 m)) |
RS-232C terminal |
Desktop computer |
To Audio |
Output port |
DIN-D-sub |
RS-232C adaptor |
RS-232C serial control cable (sold separately)
-23