![](/images/new-backgrounds/1230414/230414165x1.webp)
Replacing the Air Filter
•This projector is equipped with air fil- ters to ensure the optimal operating condition of the projector.
•The air filters should be cleaned ev- ery 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location.
•Ask your nearest Sharp Authorized Projector Dealer or Service Center to exchange the filter (PFILDA005WJZZ) when it is no longer possible to clean.
M4
M4
M4
M4
Air filter Air filter (not removable)
Power (OFF) button
Cleaning and replacing the bottom air filter
1Turn off the power and discon- nect the power cord.
•Press . Wait until the cooling fan
stops.
Power (OFF) button
2
3
Remove the bottom filter cover.
•Turn over the projector. Grab the tab
and slide open the filter cover in the direction of the arrow.
Remove the air filter. | Tab | |
• Pick the air filter up with your fingers | ||
| ||
and lift it out of the filter cover. |
|
Appendix
-81