![](/images/new-backgrounds/1230414/23041455x1.webp)
Connecting the Projector to Other Devices
Using as a Wired Remote Control
Connecting the Remote Control to the Projector
When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.), connect a ø3.5 mm minijack cable (commercially available or available as Sharp service par t QCNW- 4870CEZZ) from the WIRED R/C JACK on the top of the remote control to the WIRED RE- MOTE control input terminal.
WIRED REMOTE control input terminal
To WIRED R/C JACK
ø3.5 mm minijack cable
(commercially available or available as Sharp service part
-26