Saving Projected Images
•This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being received.
•You can capture the images that are input using RGB signals.
Capturing the Image
Select “Image Capture” in the “Options (1)” menu on the menu screen.
➝For operating the menu screen, see pages 42 to 45.
1 Press ' or " to select
“
Save Image” and press 
.
•The projected image is captured. It may take some time for capturing.
21 Press \ or to select “Yes”.
2 Press 
.
Note
•Only images from XGA (1024 ⋅ 768) non- interlace signals in INPUT 1 or INPUT 2 mode can be captured.
•The saved image is reduced to 256 colors.
•Images from equipment connected to INPUT 3 or INPUT 4 terminal cannot be captured.
•Only one image can be captured and saved.
•The color of images may differ before and after saving if an image is captured on which image adjustment has been per- formed using the “C.M.S.” function.
Deleting the Captured Image
1Select “
Delete” and press 
.
21 Press \ or to select “OK”.
2 Press 
.
Easy to Use Functions
-67