Sony HT-5800DP, HT-4850DP manual 44US, Supplied accessories, SA-WMSP68, SA-WMSP76

HT-5800DP only (SA-WMSP68) HT-4850DP and HT-4800DP only (SA-WMSP76)

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

(Models of area code U only)

With 6 ohm loads, from 28 – 200 Hz; rated 100 watts (SA-WMSP68)/75 watts (SA-WMSP76), minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output.

Speaker system	Active subwoofer,
	magnetically shielded
Speaker unit
SA-WMSP68	250 mm cone type
SA-WMSP76	200 mm cone type
Enclosure type	Acoustically loaded bass
	reflex
RMS output:
SA-WMSP68	120 W (6 ohms, 100 Hz,
	THD 10%)
SA-WMSP76	100 W (6 ohms, 100 Hz,
	THD 10%)
Input	LINE IN (input pin jacks)
Power requirements
Area code	Power requirements
U, CA	120 V AC, 60 Hz
Power consumption
SA-WMSP68	95 W
SA-WMSP76	75 W
Dimensions (w/h/d) (Approx.)
SA-WMSP68	337 × 410 × 366 mm
	(13 3/8 × 16 2/8 × 14 4/8
	inches) including front
	panel
SA-WMSP76	270 × 325 × 398 mm
	(10 3/4 × 12 7/8 × 15 3/4
	inches) including front
	panel
Mass (Approx.)
SA-WMSP68	13.0 kg (28 lb 11 oz)
SA-WMSP76	9.0 kg (19 lb 14 oz)

Supplied accessories

FM wire antenna (1)

AM loop antenna (1)

Speaker connecting cord, long (2)

Speaker connecting cord, short (3)

Monaural connecting cord (1)

Coaxial digital cord (1)

Foot pads (speakers) (20)

Foot pads (subwoofer) (4)

Remote commander (1)

R6 (size-AA) batteries (2)

Front speakers (2)

•HT-5800DP/HT-4850DP (SS-MSP68)

•HT-4800DP (SS-MSP760L/SS-MSP760R) Center speaker (1)

•HT-5800DP/HT-4850DP (SS-CNP68)

•HT-4800DP (SS-CNP760)

Surround speakers (2)

•HT-5800DP/HT-4850DP (SS-MSP68)

•HT-4800DP (SS-MSP760SL/SS-MSP760SR) Sub woofer (1)

•HT-5800DP (SA-WMSP68)

•HT-4850DP/HT-4800DP (SA-WMSP76)

For details on the area code of the component you are using, see page 3.

Design and specifications are subject to change without notice.

44US