Sony HT-5800DP, HT-4850DP manual Adjusting the tone, Advanced settings

Page 28

Adjusting the tone

You can adjust the tonal quality (bass, treble level) of the front speaker using the TONE menu.

1 Start playing a source encoded with multi channel surround effects (DVD, etc.).

2 Press MAIN MENU repeatedly to select “TONE ”.

3 Press or repeatedly to select the parameter you want to adjust.

For details, see “TONE menu parameters” below.

4 While monitoring the sound, press + or

–repeatedly to select the setting you want.

The setting is entered automatically.

5 Repeat steps 3 and 4 to adjust the other items.

Note

You cannot adjust the tone when the receiver is decoding signals with a sampling frequency of more than 48 kHz.

TONE menu parameters

xBASS XX dB

(Front speaker bass level)

xTREB. XX dB

(Front speaker treble level)

Initial setting: 0 dB

You can adjust from –6 dB to +6 dB in 1 dB steps.

Advanced settings

Using the CUSTOMIZE menu to adjust the receiver

You can adjust various receiver settings using the CUSTOMIZE menu.

1 Press MAIN MENU repeatedly to select “CUSTOM ”.

2 Press or repeatedly to select the parameter you want to adjust.

For details, see “CUSTOMIZE menu parameters” below.

3 Press + or – repeatedly to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 to adjust the other items.

CUSTOMIZE menu parameters

The initial setting is underlined.

xDEC. XXXX

(Digital audio input decoding priority)

Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks.

The initial setting is “DEC. AUTO” for VIDEO 2 and “DEC. PCM” for DVD.

•AUTO

Automatically switches the input mode between DTS, Dolby Digital, or PCM.

•PCM

PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. However, this receiver cannot decode DTS-CD when set to “DEC. PCM”.

Note

When set to “DEC. AUTO” and the sound from the digital audio jacks (for CD, etc.) is interrupted when playback starts, set to “DEC. PCM”.

28US

Image 28

Contents Home Theatre System For customers in the United States SS-MSP68 SS-CNP68 SA-WMSP68 DVP-NC675P About This ManualSS-MSP68 SS-CNP68 SA-WMSP76 DVP-NC675P Table of Contents Check how to hookup your components Connectable componentsGetting Started VCRRequired cords Audio cord Video cordOptical digital cord Audio/video cordConnect the audio jacks Hooking up a DVD player or satellite tunerFor details on the required cords A-E, see Connect the video jacks Satellite tuner TV monitor1b Connecting components with only analog audio jacks Hooking up audio componentsHooking up video components 10USConnecting the antennas Connect the supplied AM loop antenna and FM wire antennaGetting StartedConnecting speakers Example of 5.1 channel speaker system configurationAttaching foot pads 12USRequired cords 13USSpeaker cords supplied Monaural audio cord suppliedConnecting the AC power cord Performing initial setup operations14US Press EnterSpeaker setup parameters Getting Started 15USSetting up the sub woofer SL SR PL Surround speaker placementListening to the sub woofer 16USAdjusting the level Turn Level to adjust the volumePress Test Tone again after adjustment Getting Started 17USWhen Multi Channel Decoding indicator lights up To use the headphonesSelecting the component To mute the soundAutomatic tuning Press Tuning + or TuningListening to FM/AM radio Amplifier Operation 19USPresetting radio stations Presetting radio stationsTuning to preset stations Adjusting the brightness of the display Changing the displayChanging the information in the display Amplifier Operation 21USAbout the indications in the display DTS Lights up when DTS signals are input22US Decoding the input audio signal automatically Enjoying higher fidelity soundEnjoying Surround Sound 23US Press 2CHSelecting a sound field Selecting a sound field for moviesAbout DCS Digital Cinema Sound 24USSelecting a sound field for music About Cinema Studio EX modesTo turn off the surround effect Enjoying Surround Sound 25USAdjusting the Level menu Switching the audio input mode for digital componentsCustomizing sound fields Resetting sound fields to the initial settings Advanced Adjustments and Settings 27USRange COMP. XXX Dynamic range compressor EFCT. XXX Effect levelAdvanced settings Adjusting the toneUsing the Customize menu to adjust the receiver Name Naming preset stations and inputs Advanced Adjustments and Settings 29USDual Digital broadcast language selection Naming preset stations and inputs Using the Sleep TimerTo index a preset station To index an inputRecording Recording on an audio tape or MiniDiscRecording on a video tape Other Operations 31USInserting batteries into the remote Before you use your remote32US Operations Using the Remote RM-PP760 33US 34US Selecting the command mode To check the command mode of the remoteTo reset the remote to factory settings Operations Using the Remote RM-PP760 35USProgramming the remote To control a CD player To control a DAT deckTo control an MD deck To control a tape deckTo control a VCR To control a DVD playerTo control a TV To control a satellite tuner or cable boxPrecautions Additional Information 39USTroubleshooting 40USRemote control Error messageAdditional Information 41US If there is a malfunction, the display shows a messageSpecifications If the problem persistReference sections for clearing the receiver’s memory 42US43US Supplied accessories 44USSA-WMSP68 SA-WMSP76Page How to use pages 46 List of button locations and reference pagesMain unit 46USAdditional Information 47US Index