Sharp LC-50LK752E, LC-70LE754E Setting options for Single satellite, Select Satellite1/Satellite2

Quick guide

Setting options for Single satellite

Reception of a single satellite via a connected LNC (LNB).

1Select satellite.

Press J to continue.

2Select Dual Band (low/high) or Single Band. Here you specify if you use a Dual Band (Universal) LBN or Single LBN.

Press J to continue.

3Specify here the oscillator frequency for your LNB.

Normally you do not need to change the values for high and low band, unless the LNB of your satellite system uses a different oscillator frequency (important for the frequency display).

If you use the setting Single Band in step Dual/ Single Band, you only have to define the LNB frequency for the Low Band.

4Press J to continue.

See Setting options for all DVB-S reception on page 13 to continue.

Setting options for 2 satellites on 22kHz switchbox / 2 satellites on Toneburst switch

1 Select Satellite1/Satellite2

2Select satellite name from list and press OK. Press J to continue.

3Specify here the oscillator frequency for your LNB.

Normally you do not need to change the values for high and low band, unless the LNB of your satellite system uses a different oscillator frequency (important for the frequency display).

4Press OK to select frequency and press J to continue.

See Setting options for all DVB-S reception on page 13 to continue.

Setting options for Max. 4 satellites on DiSEqC multiswitch

Select DiSEqC multiswitch and adpat settings for this selection.

11