Enjoying 3D image viewing
Receiving a 3D image signal that cannot be detected automatically
When the TV receives a 3D image signal that cannot be detected automatically, you can select between 3D and 2D image viewing.
1Select the 3D source (HDMI).
2Press 3D button on remote control. The following screen appears.
3Press c/d to select “side by side” , “top/ bottom” or “Games”, and then press ;.
E To view in 3D mode ("side by side" or
"top-bottom")
1Press c/d to select the 3D signal type (“side by side” or “top/bottom”), and then press ;.
•If you select the same system as that of the input signal, 3D images are displayed.
2Turn on the 3D glasses switching them to "3D" and then wear the 3D glasses.
•The LED lights up green.
E To view in 2D mode
To view 2D mode without glasses:
Watching 2D images in 3D
You can convert normal 2D images into 3D images (3D effect).
1Press 3D button on remote control.
2Press a/b to select
3Turn on the power of the 3D glasses, and then wear the 3D glasses.
NOTE
•If the input signal switches to 2D, 2D images are displayed automatically.
•3D mode is cancelled automatically when: the setting is changed, the input source is changed, the input signal resolution is changed or the power is turned off.
Recharging the 3D glasses battery
When the battery power is low, the LED light blinks one time per second. If the 3D glasses battery runs out, you can recharge the 3D glasses battery by connecting the
When the LED light goes off, the recharge is complete.
USB |
(HDD) |
1 Press a/b to select "off”, and then press ;.
To view 2D mode some of you at the same time than other people are viewing 3D mode:
1Follow up the step 1 of previously described in "To view in 3D mode ("side by side" or
2Turn on the 3D glasses switching to "2D" and then wear the 3D glasses.
•The LED lights up green.
NOTES
•After approximately 10 minutes without receiving 3D signal the 3D glasses turn off automatically.
•To power off the power of 3D glasses, switch them to Off. The LED will also turn off.
55