USB REC function
●Recording subtitles
Select here whether subtitles are to be recorded for DVB stations.
Manual recording
With USB REC button, the recording starts immediately at the press of a button. You only need to specify the recording time.
Programming a timer recording with
EPG
You can programme timer recordings for USB REC using the EPG.
When you have programmed timer recordings, the TV set can only be switched off to the standby mode.
If you switch the TV set off by the mains, no timer recordings will be made.
1Press USB REC button. The Recording duration screen is called.
●Current programme
The broadcast being watched is recorded on to a USB memory or on to a hard disk.
●30 min/ 60 min/ 90 min/ 120 min/ 180min /240min
Allows you to choose the recording duration.
●???
Manually enter the recording duration with the numeric buttons of the remote control.
2Select desired recording time with ◄/► buttons. Press OK to confirm.
3The Timer data screen appears.
Check the timer data, change if necessary and confirm with OK. The recording will start and the recording progress bar will be displayed for a moment.
1Press EPG button.
2Select the broadcast to be recorded.
3Press REC(E) button. Recording screen is opened.
See Recording in page 32 for more information.
While recording is activated, the status indicator (AQUOS pyramid) lights up violet.
You can end a current recording prematurely by pressing
Hbutton and OK button.
NOTE
If there is no teletext or EPG programme information, the recording duration menu will appear the first time you press the I button. Select the desired recording duration and confirm using OK.
50