Sharp LC-50LE750E-V 1Adjusting the PC image 1automatically, Adjusting the PC image manually

Page 48

Connecting a PC

1Adjusting the PC image

1automatically

This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/VGA conversion cable, etc.

1Press b to select PC-INfrom AV selection, and then press OK.

2Press MENU key.

3Press ► key to select Setup and press OK.

4Press ▼ key to select Picturemore... and press

OK.

5Press ► key to select PC IN display and press OK.

6Press ▼ key to select Auto Adjustment and press OK.

NOTE

When connecting a PC and select PC-INsource, the “Auto adjustment” is executed automatically.

“Auto adjustment” may fail if the PC image has low resolution, has unclear (black) edges, or is moved while executing “Auto adjustment”.

Be sure to connect the PC to the TV and switch it on before starting “Auto adjustment”.

“Auto adjustment” can be executed only when inputting analogue signals through the “PC IN” terminal.

Adjusting the PC image manually

Ordinarily you can easily adjust the picture as necessary to change image position using “Auto Adjustment”. In some cases, however, manual adjustment is needed to optimise the image.

1Press b to select PC-INfrom AV selection, and then press OK.

2Press MENU on the remote control.

3Select Setup Picture more..., then press OK.

4Press ► key to select “PC IN display”, then press OK.

5Press ▲/▼ key to select the desired item, then press OK.

6Press ◄/► to adjust the item to the desired position.

 

Item

Horizontal

Centres the image by moving it to the

picture

left or right.

position.

 

 

 

Vertical

Centres the image by moving it up or

picture

down.

position

 

 

 

Phase

Adjusts when characters have low

position

contrast or when the image fl ickers.

 

 

Auto

Automatically adjusts the image

Adjustment

 

 

 

NOTE

The “PC IN display” options in the “Picture” menu can be adjusted only when inputting analogue signals through the “PC IN” terminal.

Depending on resolution, the vertical/horizontal manual range can be different.

PC compatibility chart

Resolution

Horizontal

Vertical

Frequency

Frequency

 

 

 

 

 

 

VGA

640 g 480

31,5 kHz

60 Hz

SVGA

800 g 600

37,9 kHz

60 Hz

XGA

1.024 g 768

48,4 kHz

60 Hz

WXGA

1.360 g 768

47,7 kHz

60 Hz

SXGA

1.280 g 1.024

64,0 kHz

60 Hz

 

 

 

 

SXGA+

1.400 g 1.050

65,3 kHz

60 Hz

UXGA

1.600 g 1.200

75,0 kHz

60 Hz

1080p

1.920 g 1.080

67,5 kHz

60 Hz

VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA are registered trademarks of International Business Machines Corporation.

NOTE

This TV has only limited PC compatibility, correct operation can only be guaranteed if the video card conforms exactly to the VESA 60 Hz standard. Any variations from this standard may result in picture distortions.

46

Image 48
Contents NET+ DivX Covered by one or more of the following U.S. PatentsContents Important Safety Precautions Precautions when transporting the TVIntroduction Dear Sharp customerRemote control unit IntroductionOpen expanded station list TV Front view TV Side and rear viewSupplied accessories Optional accessoryPreparation Attaching the stand unitUsing the remote control unit Open battery cover Insert two supplied AAA size batteriesInserting the batteries PreparationInitial installation overview Quick guide Congratulations Now you can watch TV Before turning on the power Inserting a CA CardQuick guide Initial auto installation Confirm the following before turning On the powerSetting options for DVB-T reception Setting options for DVB-C reception Setting options for DVB-S receptionSetting options for Single satellite Setting options for Max satellites on DiSEqC multiswitchSelect Satellite1/Satellite2 Press OK to select frequency and press J to continueSetting options for DiSEqC one cable communal system Setting options for all types of reception Positioning / aligning DVB-T Antenna Select Stations Select Manual Scan TVWhat is the menu? Menu operationCommon operations About the Guide DisplayFavourites Operation with the TV panel control keysCreating favourites Manage favouritesWatching TV Daily operationEPG operation Watching TVDisplay/Close the EPG screen Select a programTimer programming On when memorisedWatching TV Other EPG functions Calling additional information about the programmesUsing the MHEG-5 application UK only TeletextOther teletext menu functions Basic adjustment TV set adjustmentsPicture settings Sound settingsStations settings Basic adjustmentExplanations of some search settings Restore stationsManual Scan Radio Station lists TVControl settings Software update Via USB Volume displayDVB settings Subtitle modeJump distance Smart jumpRecording subtitles Special pagesSoftware update via USB Software update via InternetMultimedia / Network settings Connections settingsChannel list Selecting the channel You want to watchChannel information display DVB-T /DVB-C only Basic adjustment Symbol explanations in the channel Info General symbolsTransmitted audio signal Transmitted audio channelsSetting when using external devices Connecting a USB deviceUseful viewing functions Selecting the picture formatTV menu options TV/List functionTV menu options Detailed informationVideo mode Buttons for video reproduction modeSymbols on the screen for video reproduction Symbols on the screen for USB REC archive ReproductionRadio mode Audio modeAudio/Radio function Photo mode Photo functionUSB / Home Media device Compatibility Full screenWhat is Aquos NET+? Aquos NET+ functionOperations in Aquos NET+ Basic OperationAdvance Operation User sectionsRecommended Apps Area Favorite Apps ScreenExtras function Setup function Connecting external devices Before connectingIntroduction to connections Connecting external devices Hdmi connection Example of connectable devicesPB PR Component connection Video connection Example of connectable devicesAfter connecting Digital audio output setting→ Spdif mode → select PCM or Dolby Digital BelowControlling Hdmi devices using Hdmi devicesHdmi CEC connection Hdmi CEC Consumer Electronics Control menuConnecting a PC PC connectionHdmi DVI Connection Analogue Connection1Adjusting the PC image 1automatically Adjusting the PC image manuallyPC compatibility chart Connecting a PCMultimedia/Network Setup Network SetupConnecting to the network Wired installationMultimedia/Network Setup Press OK and / to select wireless, and then press OKSelect Adopt and press OK to fi x the name Select Encryption method and press OKUSB REC settings USB REC functionUSB REC function USB REC Video RecorderProgramming a timer recording with USB REC functionManual recording Allows you to choose the recording durationUSB REC function Programming a timer recording Manually Delete programmed timer entriesArchive playback settings Playing from the archive Setting bookmarksUSB REC function Jumping to bookmarks Delete individual bookmarksJumping Smart JumpTV viewing with time shift Explanation of 3D settings Enjoying 3D image viewingEnjoying 3D image viewing Viewing 3D imagesRecharging the 3D glasses battery To view in 3D mode side by side or Top-bottomTo view in 2D mode To view 2D mode without glassesTroubleshooting 3D Images Display format for 3D and 2D imagesEnjoying 3D image viewing 3D glasses lenses 3D glasses infrared receiverTroubleshooting Environmental SpecificationsAppendix Information on the software license for this productSpecifications AppendixEnd of life disposal TrademarksOther Countries outside the EU Information on Disposal for Business Users European Union847 798 754 718 654 620 580 517 Sharp Corporation
Related manuals
Manual 64 pages 12.63 Kb