Basic adjustment
●more...
●Headphone volume Adjust the headphone volume.
●Auto volume
Reduces volume differences (for advertisements that are too loud)
●AV output signal
Allows you to indicate which sound is output via the AV socket for dual sound programs: Sound1 (e.g. main language), sound 2 (e.g. foreign language) or sound 1+2 (both simultaneously).
NOTE
•Selectable items vary depending on the received broadcasts.
●Maximum volume
Determines the maximum volume that can be set.
●Maximum switch on volume
Allows you to specify the volume that the TV is set when switched on with the mains switch.
●Balance
Set stereo balance so that the volume impression is identical on the left and right.
●Clear Voice
If Clear Voice is activated, the sound of the current programme is automatically output with optimum comprehensibility when speech is detected.
●SPDIF mode
Allows you to choose between PCM or Dolby Digital audio output.
Stations settings
In this item you can find all settings concerned with station search for TV and DVB radio as well as functions for creating and editing the various stations list.
1Press MENU.
2Select Setup→Stations, the next screen appears:
3Select the station adjustment you want to adjust:
●Automatic scan TV+Radio
In this adjustment, with the search wizard, you can search/update new stations.
The current search settings will be displayed. If you want to change these search settings:
Select Change search settings, press OK and wizard will ask you for search settings.
If you agree with these settings, select Start search/ update and press OK to start scan.
NOTE
•You have to repeat the initial installation (see page 9) and automatically search new ones, if you want to delete all existing stations.
●Manual Scan TV
If you want to adapt the parameters of an existing station, first select the appropriate station.
1Select Manual Scan TV and press OK, the next screen appears:
2Select the menu item Signal source to decide in which area you want to search for stations. Depending on the selected source, various setting possibilities will be available.
3Select Search to start search for next station.
4Select Store to save station.
NOTE
•Only stations for the selected signal source can be saved, which do not already exist in the station list.
Status bar for manual search
Status bars are displayed for manual search, which show the reception quality of the individual stations during the station scan. The markers in all bars should preferably be in the green area.
C/N: (Carrier/Noise) The bar shows the signal to noise ratio. The value indicated in dB should be preferably high.
Level: The bar shows the receiving level of the station. The value displayed in dBµV should be preferably high.
BER: (Bit Error Rate) The bar shows the bit error rate of the station. The value for BER should be as low as possible.
22