USB REC function
USB REC function
USB REC (Video Recorder)
USB REC function allows you to record a TV programme and watch it later. It also allows you to schedule one or more recordings and they will be available to view later on.
If EPG or teletext data are available, the USB REC stores the title and additional information about each programme.
If additional languages are being transmitted for a DVB broadcast, these are also recorded. DVB subtitles or teletext subtitles are recorded if the recording of subtitles has been activated in the USB REC settings.
USB REC requires an external USB 2.0 memory or a hard disk, always connected and previously configured to record the information.
The first USB device connected appears as USB1 terminal.
The USB memory must be formatted before first use for USB REC function.
Buttons for USB REC function
USB REC
Archive playback
Select Von the screen during playback to fast forward. By selecting V repeatedly, allows you to increase the fast forwards speed.
Select on the screen and press OK button to restore the normal speed.
By selecting L on the screen the recording fast forwards in intervals of two minutes.
Select Son the screen during playback to rewind. By selecting S repeatedly, it allows you to increase the rewind speed.
Select on the screen and press OK button to restore the normal speed.
By selecting Ton the screen the recording rewinds in intervals of two minutes.
USB REC settings
You can make a few settings in the USB REC menu to adapt it to your requirements.
Go to MENU→Setup→Control→more→USB REC, then press OK:
Manual recording
Record interesting programmes directly into USB memory with the USB REC button. When viewing time- shift broadcasts the current broadcast can be saved to the USB memory. The programme is recorded from the beginning to the end of the time offset recording or to the end of the set recording time.
Timer-controlled recording
Select your favourite programme for recording, from the EPG. The timer overview has room for 50 entries. Watch the programmes later from the USB memory.
Serial recording
You can conveniently programme series broadcast with alternating start times.
Time shift viewing with archive recording
If youare recording a programme and would like to watch it before it has finished, you can watch the movie with a time shift while the rest is still being recorded.
●Notify hidden sections
If an entry has been hidden in an archive recording, you can be informed by a screen message when skipping a hidden area. The factory default is set to yes.
●Jump distance
Set the standard jump width (in minutes) used from jumping forwards or backwards in the film by pressing S or V. Use the numeric buttons on the remote control to enter the time.
•If Smart jump is activated, the jump width can only be set between 1 and 4 minutes.
●Smart Jump
If Smart Jump is activated, the jump width is halved every time you change the jump direction. The jump width is doubled if you jump more than three times in the same direction (max. 8 min.).
●Serial recording tolerance
A broadcast programmed with the recording type Serial is recorded if it begins within the programmed start time ± series recording tolerance. Use the numeric buttons on the remote control to enter the time (always
49